19
Network Search
Use the
buttons (On/Off) to select whether a Network Search should be performed. If the
“Network Search On” is selected, the networking of the transmission channels enables additional
transmission channels that have not yet been saved to be located. They are then saved and searched for
new channels in the same way as the existing channels.
If the “Network Search Off” is selected, only the factory-set frequency range will be searched.
When you have completed all settings, press the
$
(green) button. The following displays appear
(example):
During the search you will see the
following message (example):
New channels found are identi
fi
ed by the
suf
fi
x “NEW” (see screenshot example,
right).
Note:
You can cancel the search at any time by
pressing the
button.
Connection and setup
After completion of the search, you will
see the following message (example):
Press the
button. The newly found
channels are added at the end of the
existing complete list.
