background image

76 

 

 

 

SOLE WARRANTY

 

THE PRODUCTS AND ARE IN LIEU OF AND 

EXCLUDE ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, ARISING BY OPERATION OF LAW OR 

PRODUCTS ARE SPECIFICALLY DESIGNED AND/OR MANUFACTURED BYMANUFACTURER FOR 

YOUR USE OR PURPOSE.

 

 

WHAT WE WILL DO TO CORRECT PROBLEMS

 

If You return the defective product during the warranty period and in accordance with the instructions 

contained herein, shipping prepaid, the Manufacturer shall, at its option and as Your exclusive 

remedy, repair, correct or replace the product at no charge if the product is found by the 

Manufacturer to be a valid warranty claim, in Manufacturer

s sole discretion. Replacement product 

may be refurbished and/or different models but will be functionally equivalent to the product or 

hardware being replaced. Product repaired or replaced during the warranty period shall be covered 

by the foregoing warranty for the remainder of the original warranty period or ninety (90) days from 

the date of shipment or purchase, whichever is longer. Contact your Dealer or the Manufacturer

Customer Service at 415

-

526

-

2780 to obtain a returns materials authorization (RMA #).

 

 

HOW TO MAKE A WARRANTY CLAIM

 

If You discover any warranty related issues after 30 days, or You have questions concerning Your 

product or how to determine when service is needed, please contact your local dealer or contact the 

Manufacturer

s Technical Support at 415

-

526

-

2780 or email the Manufacturer at

 

[email protected].

 The following information must be provided as part of Your 

warranty claim: your name, address, phone number, Your products

’ 

model number, Your product

s 4

-

digit serial number, and if necessary, upon request, written confirmation of the date shown on Your 

purchase receipt and the purchase price paid for the product. All products being returned to the 

Manufacturer must have a return material authorization (RMA) number to be processed. Any item 

returned to the Manufacturer without an RMA number will not be accepted by the Manufacturer 

Contact your Dealer or Customer Service to obtain an RMA number. Once we have received Your 

returned product, we will determine, in our sole and absolute discretion, whether Your claim is covered 

by, or excluded from, this limited warranty. Repairs or modifications made to the product by other than 

the Manufacturer will nullify this limited warranty. Coverage under this limited warranty is 

conditioned at all times

 

upon the original purchaser

s compliance with these required notification and repair procedures.

 

 

LIMITATION OF LIABILITY TO THE FULLEST EXTENT PERMITTED BY LAW, IN NO EVENT, SHALL 

MANUFACTURER OR ITS AUTHORIZED SERVICE REPRESENTATIVES BE LIABLE FOR ANY 

INCIDENTAL, SPECIAL, INDIRECT, OR CONSEQUENTIAL DAMAGES, INCLUDING ANY ECONOMIC 

LOSS, WHETHER RESULTING FROMNONPERFORMANCE, USE, MISUSE OR INABILITY TO USE 

THE PRODUCT OR THE MANUFACTURER'S OR ITS AUTHORIZED SERVICE REPRESENTATIVE

NEGLIGENCE. THE MANUFACTURER SHALL NOT BE LIABLE FOR DAMAGES CAUSED BY DELAY 

IN PERFORMANCE AND, IN NO EVENT, REGARDLESS OF THE FORM OF THE CLAIM OR CAUSE OF 

ACTION (WHETHER BASED IN CONTRACT, INFRINGEMENT, NEGLIGENCE, STRICT LIABILITY, 

OTHER TORT OR OTHERWISE), SHALL MANUFACTURER

S LIABILITY TO YOU EXCEED THE 

PRICE PAID BY THE ORIGINAL OWNER FOR THE MANUFACTURER

S PRODUCT

.

 

 

The term 

consequential

” 

damages shall include, but not be limited to, loss of anticipated profits, 

business interruption, loss of use or revenue, the cost of capital or loss or damage to property or 

equipment. Some states do not allow the exclusion or limitation of incidental or consequential 

damages, so the above limitation may not apply to you

. This limited warranty gives you specific legal 

rights, and you may also have may other rights which vary from State to State.

 

Содержание Spectra Catalina 340C




















































































Отзывы: