32
Networking
Your Spectra Connect is equipped with state of the art networking options to allow the
maximum user control in a wide variety of installations. The instructions below will help you
get the most out of your Spectra Connect.
Connecting to the existing Network
1.
Turn power to the system off.
2.
Connect a standard Cat5e or Cat6 ethernet cable from the control board located inside
the feed pump module to your ship
’
s router or networking switch.
3.
Turn power to the system back on.
4.
Follow the screen prompts below:
5.
Note the line
‘
Device IP
’
shown in Fig. 3 and record the 10 digit numerical address on the
front of this manual.
Fig. 1
Fig. 2
Fig. 3
Note: Your Spectra Connect is only available when your device is connected to the same local
network as the Spectra Connect control board. If you have difficulty connecting to your
watermaker control application, double check the that your device network is the same as your
Spectra Connect
Ethernet Jack
Note: If you are connecting directly
into a wireless router,
DO NOT
CONNECT TO THE WLAN (Wireless
Local Area Network)
ethernet port.
You must connect to one of the router
ports labeled 1, 2, 3, 4, etc.
Содержание Spectra Catalina 340C
