Katadyn Spectra Catalina 340C, Инструкция по установке и эксплуатации

Страница: 17 / 83

17
Catalina 340C systems are pre - fitted with waterproof connectors for electrical and signal
cables. Each connector is different, so it is impossible to connect them incorrectly, and the
connectors are color
- coded. The system has a power inlet harness with a terminal block and
cover, a 2 - conductor boost pump cable, a 5 - conductor diversion valve and Rotoflow sensor
cable, a 2 –conductor fresh water flush solenoid cable, a Z - Ion power and signal cable, and a 50
- foot (15M) cable for the Connect display.
Diversion Valve and
Rotoflow Cable (5
-
conductor, Red).
Z - Ion power and signal
cable (3 - conductor,
Green)
Cables are shown coming
out of the bottom of the
Feed Pump Module
.
Fresh water flush
solenoid cable (2
-
conductor, Blue)
50’ (15M) cable with
connectors for the
connect display
The Catalina 340c has three ports
that can be viewed when looking
down inside the Feed Pump Module;
one for the display, one for
networking, and one for the salinity
probe. The Salinity probe is a 5 pin
cable with RJ
- 12 connectors (phone
jack) on both ends this cable runs in
parallel. The Display cable is a
standard Cat 5e ethernet cable.
Electrical continued …