Kask ZENITH PL, Инструкция по эксплуатации и уходу

Страница: 9 / 84

9
EN
desired position below the ear (Fig. 6). To remove the helmet from the head,
open the chin-strap by simultaneously pressing the buttons on each side of
the buckle (Fig. 4b).
SPARE PARTS:
Changes, replacements and/or removals of one or any of the
original components of the helmet are prohibited unless authorized by the
manufacturer. Only use original KASK spare parts. The helmet should not be
modified to accommodate other accessories other than those described below.
If necessary contact your retailer or the manufacturer directly.
ZENITH MODEL HELMET ACCESSORIES:
visor attachment adapters -
reflective stickers - sahariana - sombrero - earmuffs - eye protection visor
(EN166) - face shield (EN166) - plastic mesh protector (EN1731 ) - metal mesh
protector (EN1731) - replacement padding - winter padding.
Check with your retailer or manufacturer the actual availability of the accessories
listed above. Follow the installation and operating instructions supplied with the
accessory. Only use accessories approved by the manufacturer.
CHECK:
Before using the helmet check its integrity in all its parts. Following a
violent impact even if the damage is not visible replace the helmet, as it may
have exhausted its ability to absorb further shocks and provide the expected
protection.
CLEANING:
Clean the helmet (and any accessories) using only water, mild
soap and a soft, clean cloth, and let it air dry at room temperature. The internal
padding can be removed and washed by hand in cold water or in the washing
machine (max. 30°C). Never use chemical cleaning products or solvents.
STORAGE:
When not in use, it is best to keep the helmet at a temperature
between 5°C and 35°C, protected from direct sunlight and away from heat
sources, we recommend to store the helmet in its original package.
APPLICATION OF ADHESIVES:
Do not apply adhesives, solvents, stickers and
paint if not in compliance with the manufacturer’s specifications. Any repair or
modification not foreseen may adversely affect the protective function of the
helmet.
TRANSPORT:
Given the type of the device (helmet) there are no special
measures provided for transport.
PRECAUTIONS:
Do not use the helmet as a base or support or container.
Do not compress it. Do not drop it. Avoid contact with sharp or dangerous
objects. Do not use outside of the temperature range -20°C and +35°C. Avoid
picking up the helmet by the size adjuster. Protect against chemical agents.