manualshive.com logo in svg

Karl Storz 205352 20-1, Руководство по обслуживанию

"Karl Storz 205352 20-1" - это продукт высокого качества, который обеспечит вам эффективное функционирование вашего оборудования. Бесплатно скачайте сервисное руководство для этого изделия на нашем сайте manualshive.com. Необходимая информация для правильного использования и обслуживания доступна для вас в этом руководстве.

Поделиться
Скачать
background image

34

GASTRO Cut
Eigenschaften

Der Schnitt besteht aus alternierenden
Schneide- und Koagulationsphasen. Der Schnitt
ist gut kontrollierbar und zeichnet sich durch
eine reproduzierbare, vorwählbare Koagulations-
eigenschaft während des Schnittes aus.

Einsatzgebiete

Endoskopische Eingriffe, wenn alternierendes
Schneiden und Koagulieren mit einer Aktivierung
gefordert wird.

Geeignete Elektroden

Monofile und polyfile Schlingenelektroden für die
Polypektomie

SALINE-C-Cut
Eigenschaften

Saline C-Cut ist mit PPS System ausgestattet.
Schneidestrom, der unter Verwendung von leitfä-
higer NaCl-Spüllösung in Kombination mit den
bipolaren KARL STORZ-Resektoskopen zum blu-
tungsarmen Schnitt bei TUR-P u. TUR-B sowie
der operativen Hysteroskopie unter leitfähiger
NaCl Spüllösung eingesetzt wird.

PPS (Power Peak System) 
Einsatzgebiete

Z. B. blutungsarmer Schnitt in der TUR-P und
TUR-B und operativen Hysteroskopie.

Geeignete Elektroden

Von KARL STORZ empfohlene Schlingenelektro-
den, Vaporisationselektroden, Nadelelektroden
für bipolare Resektoskope von KARL STORZ
unter Verwendung von NaCl-Spüllösung.

SALINE-TIME-C-Cut
Eigenschaften

Saline-Time C-Cut ist mit PPS System ausgestat-
tet. Während der Anwendung wird der Saline-
Time-C-Cut mit von 0,1 Sekunden bis 0,9 Sekun-
den zeitbedingter, automatischer Abschaltung
abgegeben. Bei vorzeitigem Deaktivieren des
Fußpedals wird die Leistungsabgabe unmittelbar
unterbrochen. Während der Aktivierungszeit wird
bei Betätigung des gelben Fußpedals der
Saline-Time-C-Cut abgegeben.

GASTRO Cut
Properties

Cutting consists of alternating cutting and coag-
ulation phases. Cutting is easily controlled and is
characterized by a reproducible preselectable
coagulation property during cutting.

Fields of application

Endoscopic interventions in which alternating
cutting and coagulation is required with a single
activation.

Suitable electrodes 

Mono- and polyfilament cutting loops for
polypectomy.

SALINE-C-Cut
Properties

Saline-Time C-Cut is equipped with PPS system.
Cutting current which is used with conductive
NaCl irrigation solution in combination with bipo-
lar KARL STORZ resectoscopes for cutting with
low levels of bleeding during TUR-P and TUR-B
and also surgical hysteroscopy with conductive
NaCL irrigation solution.

PPS (Power Peak System) 
Fields of application

E.g. cutting with low levels of bleeding during
TUR-P and TUR-B and surgical hysteroscopy.

Suitable electrodes 

Cutting loops recommended by KARL STORZ,
vaporization electrodes, needle electrodes for
bipolar resectoscopes from KARL STORZ with
NaCl irrigation solution.

SALINE-TIME-C-Cut
Properties

Saline-Time C-Cut is equipped with PPS system.
During use, the Saline-Time-C-Cut is emitted
with automatic timed switch-off from 0.1 to 0.9
seconds. With premature disabling of the footpe-
dal, the power output is immediately interrupted.
During the activation time, the Saline-Time-C-Cut
current is emitted when the yellow footpedal is
depressed.

GASTRO Cut
Características 

El corte consiste en fases de corte y coagula-
ción alternantes. El corte se controla bien y se
caracteriza por una propiedad de coagulación
durante el corte preseleccionable y reproduci-
ble.

Campos de aplicación

Intervenciones endoscópicas, cuando se preci-
sa de corte y coagulación alternantes con una
activación.

Electrodos apropiados

Electrodos de asa monofilares y polifilares para
la polipectomía

SALINE-C-Cut
Características 

Saline C-Cut está equipado con el sistema PPS.
Corriente de corte, que se utiliza con solución
de irrigación conductiva de NaCl en combina-
ción con los resectoscopios bipolares
KARL STORZ para el corte con poca hemorra-
gia en RTU de próstata y de vejiga, así como
para histeroscopia operativa con solución de irri-
gación conductiva de NaCL.

PPS (Power Peak System)
Campos de aplicación

P. ej., corte con poca hemorragia en la RTU de
próstata y de vejiga e histeroscopia operativa.

Electrodos apropiados

Electrodos de asa recomendados por
KARL STORZ, electrodos de vaporización, elec-
trodos de aguja para resectoscopios bipolares
de KARL STORZ con solución de irrigación NaCl.

SALINE-TIME-C-Cut
Características 

Saline-Time-C-Cut está equipado con el sistema
PPS. Durante la utilización se emite el Saline-
Time-C-Cut de 0,1 hasta 0,9 seg. para la desco-
nexión automática. En caso de desactivación
prematura del interruptor de pedal se interrumpe
inmediatamente el suministro de potencia.
Durante el tiempo de activación se emite Saline-
Time-C-Cut, cuando se presiona el pedal amari-
llo.

Definiciones y explicaciones
para AUTOCON

®

II 400

Definitions and explanations
for AUTOCON

®

II 400

Begriffsbestimmungen und
Erläuterungen zum
AUTOCON

®

II 400

Содержание 205352 20-1













































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для 205352 20-1

MacDon 912 Operator'S Manual preview
912
Бренд: MacDon Страницы: 84
MacDon 625 Operator'S Manual preview
625
Бренд: MacDon Страницы: 89
Patton electronics 2012 Installation And Operation Manual preview
2012
Бренд: Patton electronics Страницы: 18
Facnor LS Installation Manual preview
LS
Бренд: Facnor Страницы: 33
Cadex C8000 User Manual preview
C8000
Бренд: Cadex Страницы: 300
xsto DC Series Operation Manual preview
DC Series
Бренд: xsto Страницы: 76
F&V R-3 User Manual preview
R-3
Бренд: F&V Страницы: 5
F Care Systems EVRF Quick User Manual preview
EVRF
Бренд: F Care Systems Страницы: 2
SAMCHULLY HCH Instruction Manual preview
HCH
Бренд: SAMCHULLY Страницы: 48
HAGER WERKEN SPEEDO-CLEAN Instructions For Use preview
SPEEDO-CLEAN
Бренд: HAGER WERKEN Страницы: 2
M-system M8CD Instruction Manual preview
M8CD
Бренд: M-system Страницы: 2
Rico MD-BSW280 User Manual preview
MD-BSW280
Бренд: Rico Страницы: 34
Tascam SX-1 Brochure & Specs preview
SX-1
Бренд: Tascam Страницы: 8
JBL Synthesis SDEC-3000 Calibration Manual preview
Synthesis SDEC-3000
Бренд: JBL Страницы: 24
Xilica Audio Design XP series User Manual preview
XP series
Бренд: Xilica Audio Design Страницы: 30
Valcom V-9972 Quick Start Manual preview
V-9972
Бренд: Valcom Страницы: 6
Vaisala HUMICAP HMP4 User Manual preview
HUMICAP HMP4
Бренд: Vaisala Страницы: 60
Nady Audio MP-FE2 Owner'S Manual preview
MP-FE2
Бренд: Nady Audio Страницы: 2

Бренды по названию

Популярные бренды

Загрузить еще бренды