manualshive.com logo in svg

Karl Storz 205352 20-1, Руководство по обслуживанию

"Karl Storz 205352 20-1" - это продукт высокого качества, который обеспечит вам эффективное функционирование вашего оборудования. Бесплатно скачайте сервисное руководство для этого изделия на нашем сайте manualshive.com. Необходимая информация для правильного использования и обслуживания доступна для вас в этом руководстве.

Поделиться
Скачать
background image

Instrucciones de seguridad

13

Sicherheitshinweise

Safety instructions

Machen Sie sich vor der ersten Anwendung des
Gerätes am Patienten unbedingt mit der
Funktionsweise und Bedienung des Gerätes ver-
traut.

Before using the unit on the patient for the first
time it is imperative that you be acquainted with
how the unit operates and is controlled.

Bestimmungsgemäße
Verwendung

Das AUTOCON

®

II 400 ist ein Hochfrequenz-

Chirurgiegerät für monopolares und bipolares
Schneiden und Koagulieren.
Das AUTOCON

®

II 400 darf nur mit Zubehör ver-

wendet werden, das von KARL STORZ als für
das Gerät geeignet bezeichnet wird oder des-
sen sicherheitstechnisch unbedenkliche
Verwendungsfähigkeit nachgewiesen ist.
Eigenmächtige Umbauten oder Veränderungen
des Gerätes sind aus Sicherheitsgründen unter-
sagt.

Qualifikation des Anwenders

Das AUTOCON

®

II 400 darf nur von Ärzten und

medizinischem Assistenzpersonal angewendet
werden, die über eine entsprechende fachliche
Qualifikation verfügen und am Gerät eingewie-
sen sind. Die Einweisung darf nur durch solche
Personen erfolgen, die aufgrund ihrer
Kenntnisse dazu geeignet sind.
Die zuständige Gebietsvertretung oder der
zuständiger KARL STORZ Vertreter steht für die
Einweisung bei Ihnen zur Verfügung.

Intended use

The AUTOCON

®

II 400 is a high frequency surgi-

cal unit for monopolar and bipolar cutting and
coagulation with suitable instruments.
The AUTOCON

®

II 400 may only be used with

accessories which have been designated by
KARL STORZ as suitable for the unit or the safe
use of which is proven.
Unauthorized conversions or modifications to the
unit are not allowed for safety reasons.  

User qualification

The AUTOCON

®

II 400 may only be used by

physicians and medical assistants who have a
corresponding specialized qualification and who
have been instructed in the use of the instru-
ment. Such instruction should only be provided
by persons equipped to do so on the basis of
their skills.
Your local representative or responsible
KARL STORZ member of staff is available to
provide training on your premises.

Familiarícese con las funciones y el manejo del
aparato antes de su primera utilización en el
paciente.

Empleo previsto

El AUTOCON

®

II 400 es un aparato quirúrgico

de alta frecuencia para corte y coagulación
monopolares y bipolares. 
El AUTOCON

®

II 400 sólo debe utilizarse con

accesorios que hayan sido considerados por
KARL STORZ como adecuados para el aparato,
o cuya seguridad técnica haya sido probada.
Por razones de seguridad, está prohibido efec-
tuar reformas o cambios arbitrarios en el aparato.

Calificación del usuario

El AUTOCON

®

II 400 sólo puede ser empleado

por médicos y personal de asistencia médica
que dispongan de una cualificación profesional
adecuada y que hayan recibido instrucciones
sobre la utilización del aparato. La instrucción
en el manejo debe ser realizada por personas
capacitadas para ello.
Su representante local o el responsable corres-
pondiente de KARL STORZ le proporcionará
gustosamente información pormenorizada al
respecto

.

Patientenprofil

Die Anwendung des AUTOCON

®

II 400 ist nicht

auf ein gewisses Patientenprofil (Geschlecht,
Alter, Gewicht etc.) beschränkt. Der
Gesundheitszustand für die jeweilige
Anwendung ist vom behandelden Arzt zu
beurteilen und für geeignet zu erklären.

Patient profile

The use of AUTOCON

®

II 400 is not limited to a

certain patient profile (sex, age, weight etc.).
The attending physician must assess a patient’s
health for the relevant application and declare it
suitable.

Perfil del paciente

La aplicación del AUTOCON

®

II 400 no está limi-

tada a pacientes que presenten un perfil deter-
minado (sexo, edad, peso, etc.). El médico
encargado del tratamiento deberá evaluar el
estado de salud del paciente para determinar si
el mismo es adecuado para la aplicación.

Содержание 205352 20-1













































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для 205352 20-1

Abicor Binzel FES-200 W3 Short Instruction preview
FES-200 W3
Бренд: Abicor Binzel Страницы: 92
Kärcher SC 2 Deluxe EasyFix Operating Instructions Manual preview
SC 2 Deluxe EasyFix
Бренд: Kärcher Страницы: 12
Kärcher KM 70/15 C Manual preview
KM 70/15 C
Бренд: Kärcher Страницы: 16
R&S RTO6 User Manual preview
RTO6
Бренд: R&S Страницы: 2677
Radial Engineering HDI Owner'S Manual preview
HDI
Бренд: Radial Engineering Страницы: 16
R&S SMB100B Getting Started preview
SMB100B
Бренд: R&S Страницы: 61
Yamaha MCX-C15 - MusicCAST Network Audio Player Owner'S Manual preview
MCX-C15 - MusicCAST Network Audio Player
Бренд: Yamaha Страницы: 65
Yamaha Audiogram6 Manuel Du Propriétaire preview
Audiogram6
Бренд: Yamaha Страницы: 24
Yetter TITAN 2967-033A Operator'S Manual preview
TITAN 2967-033A
Бренд: Yetter Страницы: 20
Daekyung DTR-300N Operation Manual preview
DTR-300N
Бренд: Daekyung Страницы: 15
Dust Free BIO-FIGHTER 4Xtreme Installation & Operation Manual preview
BIO-FIGHTER 4Xtreme
Бренд: Dust Free Страницы: 8
HF Scientific 70919 Instruction Manual preview
70919
Бренд: HF Scientific Страницы: 5
Lightolier F7000-18 Specification Sheet preview
F7000-18
Бренд: Lightolier Страницы: 2
Mueller H-614 Operating Instructions preview
H-614
Бренд: Mueller Страницы: 2
Tractel Tractelift Type II Operating Manual preview
Tractelift Type II
Бренд: Tractel Страницы: 28
WENVY 09-0101 Operating Manual preview
09-0101
Бренд: WENVY Страницы: 23
Matrix A3x-01 Ascent Trainer Service Manual preview
A3x-01 Ascent Trainer
Бренд: Matrix Страницы: 69
IKA T 25 digital ULTRA-TURRAX Operating Instructions Manual preview
T 25 digital ULTRA-TURRAX
Бренд: IKA Страницы: 140

Бренды по названию

Популярные бренды

Загрузить еще бренды