47
KaDeck
3.26
Versatile air conditioning for offices and administration buildings
Installation and operating instructions
9 Faults
The follow chapter describes possible causes of faults and the
work needed to rectify them.
Should faults occur frequently, shorten the maintenance
intervals in line with the actual loading on the unit.
Contact the manufacturer with any faults that cannot be
rectified using the following information
( Chapter 1.4 "Technical Data" on page 6 ff.)
Behaviour in the event of faults
The following applies:
1.
Immediately switch off the unit with faults that pose
animmediate danger to persons or property.
2.
Determine the cause of the fault.
3.
Switch off the unit and prevent if from being
reconnected if rectifying the fault requires work in the
hazard area. Immediately advise a supervisor on site
about the fault.
4.
Either rectify the fault yourself or have it repaired by
authorised personnel, depending on the nature of the fault.
9.1 Fault display
The KaControl displays error messages.
First read the separate instructions for the room control unit.
The fault table ( Chapter 9.2 "Fault Tables" on
page 59) provides information on how to rectify
and remedy faults.
Fig. 70: KaControl unit
Führungsgerät
EC 1
Master unit EC 1
