38
3.26
KaDeck
Versatile air conditioning for offices and administration buildings
Installation and operating instructions
LCD display symbols
1
13
12
11
10
9
8
7
6
2
3
4
5
1
Display of setpoint room temperature
2
Current time
3
Timer program enabled
4
Weekday
5
Alarm
6
Selected function is locked
7
Eco mode
8
Setpoint setting enabled
9
Fan control setting Auto-0-1-2-3-4-5
10
Ventilation mode
11
Cooling mode
12
Heating mode
13
Automatic Heating/Cooling changeover mode
Operation of the basic functions
Function
Description
Switch On/Off
Switch on by pressing key 2 or the navigator dial. When switched on, the display shows a
temperature. Switch off by pressing button 2 or the navigator dial. OFF is shown.
Change temperature
Turn the navigator dial to the left to lower, and to the right to increase, the required temperature.
Confirm the entry by pressing the navigator dial.
Fan speed...
Change by pressing the side fan button or using the navigator dial. Briefly press the navigator dial
once. Turn the navigator dial to the left to lower, and to the right to increase, the required fan
speed. Press the navigator dial once more to confirm the display.
In Automatic mode, the speed is adjusted when the room temperature deviates from the setpoint
temperature.
Heating/Cooling/
Recirculation
Change by pressing the side fan button or using the navigator dial.
To change using the navigator dial, first press the navigator dial for approx. 1 second to move to the
Fan stage selection. Then press the navigator dial once again for 3 seconds to go to the Time setting.
Press again for approx. 3 seconds to move to the Timer menu.
Press again for approx. 3 seconds to move to the Mode menu. Press briefly to confirm the entry.
Timer program
The KaControl provides the option of setting a weekly timer. Refer to the separate KaControl
instructions for this.
