16
3.26
KaDeck
Versatile air conditioning for offices and administration buildings
Installation and operating instructions
6
Waterside
connection area
7
8
9
10
12
13
11
Fresh air
connection
Condensation pump
Heat exchanger
Hinge
Air inlet filter
Electrical
junction box
EC tangential fan
1
Connecting frame:
Suspended ceiling models
have a frame on all sides, which
connects the KaDeck to the
suspended ceiling.
2
Ceiling panel:
RAL 9010 powder-coated
Other colours are optionally
possible on request.
3
Invisible latches:
ndustry standard for a virtually
unlimited service life, without
adversely affecting the design.
4
Air outlets:
Depending on the models, the
air outlets for the Coanda
effect are ideally positioned to
minimise draughts.
5
Air inlet:
Large air inlet grille with large
free cross-section.
6
Waterside connection:
The waterside (and electrical)
connected area is arranged so
that no additional service hatches
are needed.
7
Fresh air connection:
All models have a possible fresh
air supply
from above.
The suspended ceiling versions
also offers the option of side
connection via the optional
primary air spigot.
8
Condensation pump:
Whisper-quiet condensation
pump with alarm contact with
the wet cooling version.
9
Heat exchanger:
Depending on whether dry or
wet cooling is needed, optimised
for maximum output in a 2-pipe
system.
10
Condensation pump and
float switch:
Extremely robust design
Invisible from outside.
Enables simple and frequent
maintenance the risk of
possible damage.
If required, the cover panel can
be fully and simply removed.
11
EC tangential fan:
With infinitely variable EC
energy-saving technology.
Motor monitoring with internal
fault processing.
Optimised flow for minimum
noise levels.
12
Air inlet filter:
Optional air filter for cleaning the
room air and protecting the heat
exchanger
13
Electrical junction box:
Can be lowered for wiring or
maintenance purposes.
Optimum accessibility.
A dew-point monitor can
optionally be fitted.
