45
KaDeck
3.26
Versatile air conditioning for offices and administration buildings
Installation and operating instructions
8.3.2 Cleaning / Visual inspections
1. Open intake cover, as described in 8.3.1.
2. (optional)
The intake cover can also be fully removed to clean it,
simply removing the securing bolts in the hinges. After
cleaning the cover, as shown in the diagram, re-insert the
securing bolts and secure with the securing disc.
3. Check water connections and lines for leaks.
4. Check that the heat exchanger is clean and, if necessary
clean. Dusty and greasy deposits on the fins of the heat
exchanger impair the airflow and heat transfer.
Carefully blast heat exchanger with compressed air until
dust and dirt is removed from the fins.
Important: Fins bend easily!
5. The fan unit can be removed to clean the discharge
side of the heat exchange. Simply loosen the bolts
1
indicated (4 x per fan) and remove the
plug-in connector
2
.
6.
Check the electrical connections;
Loosen the bolts and remove the electrical junction
box to guarantee optimum access
1
2
