31
KaDeck
3.26
Versatile air conditioning for offices and administration buildings
Installation and operating instructions
Please read these instructions in full to ensure correct and proper
installation and the correct operation of the
KaController.
Please note the following safety-related information:
Disconnect all parts of the system that are being worked on.
Ensure that the system cannot be accidentally re-connected!
Before commencing with installation/maintenance work, wait
until the fan has come to a standstill after the unit has been
switched off.
Caution! Pipes, casings and fittings can become very hot or very
cold depending on the operating mode!
Qualified personnel must have undergone training to provide
them with adequate knowledge of the following:
Safety and accident prevention regulations
Guidelines and recognised technical regulations, i.e. Association
of German Electricians (VDE)
DIN and EN standards
Accident prevention regulations VBG, VBG4, VBG9a
DIN VDE 0100, DIN VDE 0105
EN 60730 (Part 1)
Technical wiring regulations (TABs) issued by the regional
electricity providers
Protect the products from any moisture during installation. Check the
intended use with the manufacturer in case of any doubt.
Any use other than the uses specified above is deemed not to
be correct and proper use. The operator of the unit is solely
responsible for any damage arising as a result of this. Intended use is
deemed to include observing the installation instructions described in
these instructions.
Modifications to the unit
Do not undertake any modifications or upgrades on the KaController
or KaDeck without discussing them with the manufacturer as they
can impair the safety and operation of the unit.
Do not carry out any measures on the unit not described in this
manual. Make sure that on-site systems and cabling are suitable for
connection to the intended system!
IMPORTANT NOTE!
Non-compliance with the regulations and operating
instructions can result in the units malfunctioning
with consequential damage and danger to people.
There is a danger of fatal injury caused by wires
being swapped due to incorrect wiring! Disconnect
all parts of the system from the mains power supply
and prevent them from being reconnected before
starting any connection and maintenance work!
