Kambrook KPR800, Инструкция пользователя

Страница: 18 / 52

17
Fig. 8
NOTE:
The Pressure Express will
not pressurise if the lid is not fitted
and locked correctly. Ensure that
the locking graphics are properly
aligned when fitting the lid.
7.
Make sure that the pressure
regulator/release valve is sitting
in the sealed position (See Fig. 9).
If the pressure regulator/release
valve is in the venting position,
the Pressure Express will not build
up the required pressure needed
to cook.
Fig. 9
8.
Plug the removable power cord
into the stainless steel housing
and into a 230V or 240V power
outlet and switch on. The unit will
“Beep” one time and the standby
lights will begin to flash ‘- -’ on
the Digital Control Panel, which
indicates that the pressure cooker
is ready for use.
9.
Select the required cooking
function on the Digital Control
Panel, by pressing the desired
setting button. The indicator light
on the selected setting button
‘- -’ will flash continuously. Each
setting except for sautéing has
a pre-set cooking time. However
the pre-set cooking time can be
adjusted for the White Rice, Brown
Rice, Soup/Curry and Pot Roast
settings, by continuously pressing
the ‘SET TIMER’ button to the
desired cooking time in 1 minute
increments. Please refer to ‘Using
the Set Timer Function’ on page 14.
NOTE:
Once the pre-set cooking
time has been selected, if the
Start/Cancel button has not been
pressed within 30 seconds the
Digital Control Panel will revert
back to the standby mode ‘- -’. To
commence cooking refer to step 9.
10.
Press the ‘START/CANCEL’ button
to commence cooking. The unit
will “Beep” three times and the
red light will illuminate on the
chosen setting button and
Start/Cancel button.
11.
During pressure build up, the
pressure indicator valve and the
pressure regulator/ release valve
will begin to “Hiss” and release
minimal amounts of steam.
12. The cooking timer displayed
on the Digital Control Panel
will not begin to count down
until the Pressure Express has
reached pressure.