Kalmar ContChamp DRD S Series, Техническое руководство

Страница: 6 / 298

ContChamp DRD-S
Technical Handbook
Safety regulations
4 S. Grupp 00
9407
04-10
KL1103
z Only authorized and qualified personnel may
work with the safety system. (ECS-system)
z If the overload safety system override function
has been used, there is a risk of forward tipping.
The truck should be operated with extreme care
to prevent accidents.
z Great care must be exercised at all times when
driving the machine. Always remember the great
height and width of the machine so that collision
with beams, cables etc. is avoided
z It is prohibited to start lifting a container if the
warning light TWIST-LOCK UNLOCKED (red) is
lit or if any of the warning lights TWIST-LOCK
LOCKED (green) or ALIGNMENT (orange) are
extinguished. N.B. the ALIGNMENT warning
light goes out once the lift has begun.
z
If the safety system warning lamps are not func-
tioning, the system must be immediately re-
paired. To use a truck with faulty warning lamps
is a great safety risk.
z Do not drive the truck with load raised high
above the ground, since the truck may overturn.
The transport of heavy loads must be carried out
with the load as close to the truck as possible,
i.e. with the boom retracted and lowered as far
as possible without obstructing vision, see pic-
ture below.
z Never run hands or fingers along any tubes,
pipes or hoses whilst investigating for possible
leaks as some of these lines (diesel fuel, hydrau-
lic, steering, etc.) operate at extremely high
pressures and even the most minute of leaks
can cause oil or fluid to penetrate the skin.
z Under no circumstances may compressed air be
used to remove a hydraulic piston from its cylin-
der.
z Always attend to damage and wear that may be
of significance to the performance and useful life
of the truck or to the safety of the personnel.
z Follow the safety rules whenever carrying out
service work on the air conditioner. The refriger-
ant is injurious to the skin and eyes. Only author-
ized service personnel may repair the system.
z
The truck’s hydraulic system includes high pres-
sure hydraulic accumulators. Before working on
the hydraulic system, the accumulators must be
emptied into the tank, with the help of the special
accumulator evacuation valve. Also valve B for
emergency pressure to servo system must be
opened.
z Never carry out any service work on the boom or
attachment when the engine is running.
Safety regulations
KL591
A. Quick evacuation valve, accumulators
B. Valve for emergency pressure to servo system
Transport position