Kaliburn ProLine 2200 страница 34 Скачать руководство пользователя

Страница: 34 / 138

Installation

ProLine 2200 User’s Manual REV N

This information is subject to the controls of the Export Administration Regulations [EAR]. This information shall not be provided to

non-U.S. persons or transferred by any means to any location outside the United States contrary to the requirements of the EAR.

3-10

Torch Connections

Perform the following steps to connect the torch leads and gas hoses to the torch base and

torch solenoid assembly. See Figure 3-5 for additional information.

Note: When making hose connections, only tighten the brass fittings

enough to make water or gas seals. The fittings are subject

to damage if over tightened. Also, use two wrenches when

tightening the torch fittings to avoid damaging the torch

Gas Hose Package/Torch Solenoid Control Cable Installation

•

Route the Plasma, Shield, Preflow, and Postflow Gas Hoses and the Torch

Solenoid Control Cable from the power supply to the torch station. Note that

the Shield Gas Hose extends down inside the torch handle, so it should be

routed accordingly. Also, plug P12 on the Torch Solenoid Control Cable

attaches at the power supply and P15 attaches to the torch solenoid assembly.

Torch Handle Installation

•

Route the torch leads through the torch handle. Note that the threaded end of

the torch handle mates with the torch base.

•

Route the Shield Gas Hose through the torch handle.

•

Route the 15” Torch Plasma Gas Hose through the torch handle. Note that the

larger fitting on the Torch Plasma Gas Hose mates with the torch base.

Torch Electrode/Coolant Supply Lead

•

Connect the Torch Electrode/Coolant Supply Lead to the torch base as shown.

Torch Coolant Return Lead

•

Connect the Torch Coolant Return Lead to the torch base as shown. Note that

the Torch Coolant Return Lead fitting has left hand threads.

Torch Nozzle Lead

•

Connect the Torch Nozzle Lead to the torch base as shown.

Torch CTP Sensor Lead

•

Connect the Torch CTP Sensor Lead to the torch base as shown.

Shield Gas Hose

•

Connect the Shield Gas Hose to the torch base as shown.

Torch Plasma Gas Hose

•

Connect the Torch Plasma Gas Hose to the torch base as shown.

Содержание ProLine 2200











































































































































Результаты поиска

Содержание ProLine 2200

Отзывы:

Похожие инструкции для ProLine 2200

Бренды по названию

Популярные бренды

Kaliburn ProLine 2200, Руководство пользователя

Результаты поиска

Содержание ProLine 2200

Отзывы:

Похожие инструкции для ProLine 2200

Бренды по названию

Популярные бренды