
Full digital ultrasonic diagnostic instruments (Vet) User’s Manual V2.00
21
Chapter Eight Obstetric Measurement
8.1 Measurement and Calculation items
Obstetric tables of the system including: 1.BOVINE, 2.EQUINE, 3.OVINE, 4.CANINE, 5.FELINE,
6.GOAT, 7.LLAMA, 8. SWINE, which is reference for doctor.
8.2 Measurement of Gestational Age (GA) and Estimated Date of Confinement (EDC)
Follow the steps below:
1.
In B, B/B mode, freeze the desired image, press direction keys
to choose “OB” in the display
area;
2.
Press
key to display the obstetric measurement animals on the lower part of the screen,
“VETERI Select: 1.BOVINE, 2.EQUINE, 3.OVINE, 4.CANINE, 5.FELINE, 6.GOAT,
7.LLAMA, 8. SWINE”, press direction keys
to select the measurement animal, press
key
to confirm, measured parameters of this animal are showed on the lower part of the screen, (for
example, select goat that is, display the types of goat);
3.
Press direction keys
to select the measured parameters (for example select goat, this step is to
select the type of goat, press
key again to display the measured parameters of goat), press
key,
the cursor will show “+”;
4.
Press direction keys or operate mouse to move the “+” mark to desired position, press
key or
click left mouse to set the “+” mark position as the starting point
of the measurement;
5.
Press direction keys or operate mouse to move the“+” mark to the end point
of the measurement.
At the same time, a lighted dotted line appears between the start and the end as the dashed locus of
the measurement. The measured value is automatically displayed at the built-in mark“+: ----mm”
on the right side of the screen; G.A and EDC value to be displayed in real time in the right area of
the screen;
6.
Press
key or repeatedly click left mouse to exchange the starting point
and end point;
7.
Press
key or click right mouse to finish the first measurement;
8.
Press
key to quit measurement status for this animal;
9.
Repeat steps 2 to 8 to complete a variety of animals measurements;
10.
Press direction keys
to choose “Clear” in display area and press
key or synchronously
click the left and right key of mouse to clear all marks and data;
11.
Press
key or click the middle mouse to unfreeze, clear all marks and data and quit the
measurement status.
8.3 Measurement of Swine’s lean percentage
% Lean calculation formula uses NSIF formula.
1.
In B, B/B mode, freeze the desired image, press direction keys
to choose “OB” in the display
area;
2.
Press
key to display the obstetric measurement animals on the lower part of the screen,
“VETERI Select: 1.BOVINE, 2.EQUINE, 3.OVINE, 4.CANINE, 5.FELINE, 6.GOAT,
7.LLAMA, 8. SWINE”, press direction keys
to select “8.SWINE”, press
key to confirm,
measured parameters of this animal are showed on the lower part of the screen;
3.
Press direction keys
to select “2. %Lean”, press
key again to confirm, the cursor will show
“+”;
4.
Press direction keys
to select “Weight” (range1.0~300.0kg), press
key again to
confirm;