
Full digital ultrasonic diagnostic instruments (Vet) User’s Manual V2.00
17
4. Press
key to return to frozen status.
6.13
Print picture
1. Freeze the image, press
key to enter reading or saving image status;
2. Press
key to appear “Wait” prompt. After the prompt disappear, the image is printed out.
Explanation:
1. Before print picture, first open the main unit, and then insert printer data line into USB
interface of printer, the other end to USB interface of the main unit, at last open the printer.
2. When carry out each print task, it needs waiting about 40 seconds to print out the picture.
6.14 Cine loop
In real-time mode, the system is always saving the scanned image. The playback images are for a
period time images before freeze.
Freeze the image, continuously press
key three times to enter the automatic playback status; Press
key to enter pause status when playing back; Press direction keys
or operate mouse to view
images frame by frame in pause status; Continuously press
key three times again to return to automatic
playback status. In the process of saving and playback, relevant data of image frames saved and played are
shown on the lower right corner of the screen.
Press
key to return to frozen status.
Press
key unfreeze and quit playback status.
Note: If the images appear abnormal, that is without enough storage time and the images have
not been stored full.
6.15 Text Input
Operation steps:
1.
Freeze image;
2.
Press
key, the cursor is located behind name;
3.
Press
key again or right click mouse, at the same time characters input menu will be shown at
the bottom of the screen:
Caps 0 1 2 3 4 5 6 7 8 9 a b c d e f g h
Shift i j k l m n o p q r s t u v w x y z
Press direction keys or operate mouse to move cursor to point to Caps, and then press
key or left
click mouse to achieve
capital and small letter conversion; If the cursor point to Shift, press
key
or left click mouse again to achieve the conversion between the letter and punctuation;
4.
Press direction keys to choose “numbers” or “characters” and press
key to confirm; Or operate
mouse to click “numbers” or “characters” to input;
5.
After inputting name, press
key and then press direction key
to move cursor to “ID” and
press
key again to input according to Step 4, the number (ID) only be made up of numbers,
letters or underlines;;
6.
After inputting ID, press
key and press direction keys to move cursor to image area and
press
key again to input according to Step 4;
7.
If need modify the content, continuously press
key twice to quit annotation status, press
direction keys
to select “Clear”, at last press
key to clear all noted marks and retype;
8.
Press
key to quit.