
Full digital ultrasonic diagnostic instruments (Vet) User’s Manual V2.00
5
1. Place the instrument on the arm to use
The instrument can be placed on the arm to use for two states: on the right arm or left arm. Right ring
or left ring is respectively set on the right thumb or left thumb, hold the instrument as shown in the figure
below.
Fig. Use in right arm Fig. Use in left arm
2. Instrument hanging on the chest to use
1) Install the hoods A, B and C as the following fig.
Finish the installation of hood
The sequency and
direction of installation
Hood 1 Hood 2
Hood 3
Fig. Install the hood
2) The installed hood should be inserted the “Hood buckle position” aligned with the side of the
instrument, and then be inserted into the other side.
Note: The force should be uniform.
3) Take out the attached strap; install it on the “the hook of hood” or put it on the “the hole of strap” of
the instrument as shown in the figure below.
4) Adjust the length of strap hanging on the neck to meet the requirements of the screen visual angle.
Adjustable strap
the position of strap hole
the hook of hood
the hook of hood
Hood buckle position
Hood buckle position
Fig. Hang on the chest to use
Attention:
When
using the soft rubber jacket, if allergy, please consult a doctor
immediately and increase protective measures (e.g. Wear gloves before use).