Full digital ultrasonic diagnostic instruments (Vet) User’s Manual V2.00
14
Lithotripsy positioning line: In real-time B mode, press
key to enter main-menu and press direction
keys
to move cursor to “Puncture” and then press direction keys
to choose line 3, press
key
to confirm, lithotripsy positioning line appears on the screen; At the same time, the measurement depth of
lithotripsy positioning line “+: 0.0mm” is shown at the top right corner, operate the up/down keys to
positioning the depth. Press
key to quit.
6.8 Body Mark and Probe Mark
This product contains 27 body marks that are divided into two pages when display. The operation steps
are as follows:
1.
In frozen status, press
key to enter main-menu and press direction keys
to move cursor to
“BodyMark”, press
key, body marks will be showed in the image area, press direction keys to change
pages;
2.
Press direction keys to move to the position of desired body mark, press
key to confirm the
selected body mark;
3.
Press direction keys or operate mouse to change the probe mark position; press
key to change
probe mark direction;
4.
Press
key to quit body mark and probe mark status;
5.
Press
key to quit froze and body mark status.
6.9 Image storage and recall
6.9.1 Save image
Storage to main unit
1. Freeze the image;
2. Press
key, a “Save” prompt appears on lower right corner of the screen;
3. Press direction keys
to select the image code need to be saved in the “LOCAL”, such as choose
“003”;
4. Press
key to appear “Wait” prompt. After the prompt disappear, the current image is saved in the
frame for coded “003”. The saved image code is preceded with asterisk “*”;
5. Press
key to quit saving status and press
key to return to real-time status.
Storage to U disk
1. Plug U disk;
2. Freeze the image;
3. Press
key, a “Save” prompt appears on lower right corner of the screen;
4. Press direction keys
to select the image code need to be saved in the U disk, such as choose “004”;
5. Press
key to appear “Wait” prompt. After the prompt disappear, the current image is stored in the
frame for coded “004”. The saved image code is preceded with asterisk “*”. The current image is
stored in the specified folder in U disk; the folder name is patient number (ID), which is made up of
underline, letters or numbers, without spaces; the file name is the selected saving code. If user did not
enter the number (ID), the folder name defaults to “USER”. The saved image code is preceded with
asterisk “*”;
6. Press
key to quit saving status and press
key to return to real-time mode.
Explanation:
1. Each number (ID) corresponds to a folder, the largest storage for each folder is 100 images.
2. Press
key, can select “LOCAL” or “U Disk”.
3. If you want to use number (ID) for the folder name, must first input number (ID) and then
store image. Folder name is made up of underline, letters or numbers, without spaces.