Safety
Operating Instructions KACO blueplanet 29.0TL3
Page 5
EN
CAUTION
Risk of damage to property
Failure to observe this warning will lead to property damage.
1.2.3
Additional information symbols
NOTE
Useful information and notes
EN
Country-specific function
Functions restricted to one or more countries are labelled with country codes in accordance with
ISO 3166-1.
1.2.4
Instructions symbols guide
Instructions
ඣ
Prerequisite(s) before carrying out the following step(s) (optional)
1.
Carry out step.
2. (Additional steps, if applicable)
»
Result of the step(s) (optional)
1.3 Target
group
All activities described in the document may only be carried out by specially trained personnel with the following
qualifications:
•
Knowledge about how an inverter functions and operates
•
Training in the handling of hazards and risks during the installation and operation of electrical devices and sys-
tems
•
Education concerning the installation and start-up of electrical units and systems
•
Knowledge of applicable standards and directives
•
Knowledge and adherence to this document with all safety notices.
2 Safety
DANGER
Lethal voltages are still present in the terminals and cables of the inverter even after the
inverter has been switched off and disconnected!
Severe injuries or death will occur when touching the cables and terminals in the inverter.
›
Only appropriately qualified and authorised electricians may open, install or maintain the inverter.
›
Keep the inverter closed when the unit is in operation.
›
Do not touch the cables or terminals when switching the unit on and off.
›
Do not make any modifications to the inverter.
The electrician is responsible for observing all existing standards and regulations.
•
Be sure to observe IEC 60364-7-712:2002 “Requirements for special installations or locations – solar photovoltaic
(PV) power supply systems” in particular and all applicable regulations and specifications.
•
Ensure operational safety by providing proper grounding, conductor dimensioning and appropriate protection
against short circuiting.
•
Observe all safety instructions on the inverter and in these operating instructions.