background image

13 Appendix 

13.1 

EU Declaration of Conformity

Manufacturer's name  
and address

KACO new energy GmbH 

Carl-Zeiss-Straße 1 
74172 Neckarsulm, Germany

Product description

Photovoltaic feed-in inverter 

Type designation

KACO blueplanet 29.0 TL3 M1 WM OD II4S

KACO blueplanet 29.0 TL3 M1 WM OD II4M

KACO blueplanet 29.0 TL3 M1 WM OD II4X

This is to confirm that the units listed above comply with the protection requirements set forth in the Directive of the 
Council of the European Union of 26th February 2014 on the harmonisation of the laws of the member states relating 
to Electromagnetic Compatibility (2014/30/EU) and the Low Voltage Directive (2014/35/EU).

The units conform to the following standards:

2014/35/EU 

“Directive relating to electrical equipment 
designed for use within certain 
voltage limits”

Safety of the unit

EN 62109-1:2010 
EN 62109-2:2011

2014/30/EU

“Directive relating to electromagnetic compati-
bility“

Interference immunity

EN 61000-6-1:2007 
EN 61000-6-2:2005 + AC:2005 

Emitted interference

EN 61000-6-3:2007 + A1:2011 + AC:2012

Secondary effects on the grid

EN 61000-3-11:2000 
EN 61000-3-12:2011

The types mentioned above are therefore labelled with the CE mark.

Unauthorised modifications to the supplied units and/or any use of the units that is contrary to their intended use 
render this Declaration of Conformity null and void.

This declaration of conformity is issued under the sole responsibility of KACO new energy GmbH.

Neckarsulm, 16/11/2017

KACO new energy GmbH

p.p. Matthias Haag 
Management team for technology / CTO

Содержание blueplanet 29.0 TL3 Series

































































Отзывы: