Configuration and Operation
Page 46
Operating Instructions KACO blueplanet 29.0TL3
EN
EN
Country-spec.
Setting
Menu
level
Display/
setting
Action in this menu/meaning
BE, CH-NS, CY,
DE-NS, DK, JP,
LU-NS, TW, UD
4
1
2
3
1
Line error
Display of grid faults.
"
To show the last 5 grid fault messages, select the
“Show” key.
All countries
4
1
2
3
4
“Information”
menu
"
Open the menu: Press the right arrow button or
the OK button.
4
1
2
3
1
Inv. type
Displays the type designation of the inverter.
If feed-in power is actively limited: display maximum
power in kW.
4
1
2
3
1
SW version
Displays the installed software version.
4
1
2
3
1
Serial number
Displays the serial number of the inverter.
4
1
2
3
1
Display country
Displays the selected country setting.
Optional: Displays the grid type if a grid type has been
selected.
4
1
2
3
4
“Manufacturer”
menu
The display shows information about the unit manu-
facturer.
NOTE
Please refer to the application note “APL_Software_Function_Description” on our website for more
information about individual menu functions.
8.4 Inverter
monitoring
The inverter has an integrated web server. This makes it possible to monitor and record the operating state and yield
of your PV system.
You can display the recorded data using:
•
The integrated LCD
•
The integrated web server using an Internet-capable device connected to the Ethernet interface of the inverter
•
A storage medium connected to the USB interface, for example, a USB stick.
8.4.1 USB
interface
Use an external USB storage device to read operating data saved in the inverter.
Reading log data
NOTE
The USB interface is approved solely for use with USB flash storage devices (“USB sticks”). The max-
imum available current is 100 mA. If a device with a higher power requirement is used, the power
supply for the USB interface automatically shuts down to protect the inverter from damage.
Reading data
1.
Connect a suitable USB storage device to the USB interface on the communication circuit board.
2. Open the “Log data display” menu.
3. Select the “Save to USB” item.
4. Select the desired log data using the 4-way button.
5. Press the Enter button.
»
The inverter saves the selected log data to the USB storage device.
