Kaco blueplanet 29.0 TL3 M1 OD II4S, Руководство пользователя

Страница: 49 / 91

4 1 2 3 4
Zero current under-
voltage threshold
Zero current over-
voltage threshold
0 – 184 V / 253 – 340
V
F Set the voltage threshold for zero current mode.
4 1 2 3 4
Reactive current limita-
tion
0 – 100 % [ % Imax]
F
Set the reactive power limitation.
4 1 2 3 4
Minimum support time
1000 – 15000 ms
F Set the minimum support time.
4 1 2 3 4
Connection cond. NOTE: The device checks the grid voltage and grid frequency. The grid
feed-in mode begins if the measurements are within the set ranges.
F Set minimum and maximum values ​​for connection.
4 1 2 3 4
Min. switch-on voltage
after grid monitoring
Max. switch-on voltage
after grid monitoring
207 [V] - 253 [V]
F Set min. and max. switch-on voltage after grid monitoring.
4 1 2 3 4
Min. switch-on fre-
quency after grid mon-
itoring
Max. switch-on fre-
quency after grid mon-
itoring
47.50 [Hz] – 50.07
[Hz]
F
Set min. and max. switch-on frequency after grid monitoring.
4 1 2 3 4
Min. conn. voltage
after grid failure
Max conn. voltage
after grid failure
F
Set min. and max. switch-on voltage after grid monitoring.
4 1 2 3
4
Min. conn. frequency
after grid failure
Max. conn. frequency
after grid failure
F Set min. and max. switch-on frequency after grid monitoring.
4 1 2 3 4
Monitoring time PV
voltage F Set time for voltage monitoring.
Monitoring time grid
voltage
F
Set time for voltage monitoring.
4 1 2
3
4
Waiting time after grid
failure F Set wait time for grid monitoring.
4 1 2
3
4
Enhanced Island Detec-
tion NOTE: Grid operators require shutdown of the device with standalone
grid detection
Advanced islanding detection [See section 10.5 } Page 72]
4 1 2 3 4
ROCOF operation
mode passive Off |
On
F
Activate passive grid influence by application of a frequency.
ROCOF operation
mode active Off |
On F Activate active grid influence by application of a frequency.
Kaco blueplanet 29.0TL3
Page 49
EN