35
Display Daylight Savings Time Status
This feature enables man a ge ri al per son nel to display the Daylight Savings Time status in the lock.
Note: Only the Master User and a Manager User can display Daylight Savings Time status in the lock.
To display Daylight Savings Time status, complete the following steps:
Step
Detailed Instructions
1.
Power lock.
Power the lock by depressing the outside lever.
2.
Enter Master User or a
Enter the Master User or a Manager User combination. The lock will beep/
Manager User combination.
flash the green LED on each keystroke entered. If the Clear key is pressed
during data entry, the lock responds with one beep/flash of the green LED
fol lowed by the red LED, and all digits of the combination must be re-
entered. The lock responds with three beeps/flashes of the green LED to
indicate available entry. If the com bi na tion is not valid, the lock re sponds with
three beeps/flashes of the red LED.
3.
Press then 12.
Before re-lock time expires, press (Enter key) followed by the 1 key and
then the 2 key. The lock responds with two beeps/flashes of the green LED if
lock is on Standard Time and with four beeps/flashes if lock is on Daylight
Savings Time. Sub se quent ly, the lock responds with two si mul ta neous
beeps/flashes of the green and red LEDs.
Enable Palm Communications
This feature provides the function to set up communications between the lock and the Palm organizer.
To enable Palm communications, complete the fol low ing steps:
Step
Detailed Instructions
1.
Connect Palm organizer to
Connect the Palm Interface Module to the lock using the interface cable.
lock.
2.
Power lock.
Power the lock by depressing the outside lever.
3.
Enter Master User or a
Enter the Master User or a Manager User combination. The lock will beep/
Manager User combination.
flash the green LED on each keystroke entered. If the Clear key is pressed
during data entry, the lock responds with one beep/flash of the green LED
fol lowed by the red LED, and all digits of the combination must be re-
entered. The lock responds with three beeps/flashes of the green LED to
indicate available entry. If the com bi na tion is not valid, the lock re sponds with
three beeps/flashes of the red LED.
4.
Press then 6.
Before re-lock time expires, press (Enter key) followed by the 6 key. The
lock re sponds with one beep/flash of the green LED every second until the
Palm interface cable has been in sert ed into the lock com mu ni ca tion
connector.
5.
Perform desired Palm
Turn on the Palm organizer and tap the Connect to PC button at the bottom
function.
of the Main Menu. Tap the appropriate button on the top of the Connect to
Lock menu to perform the desired func tion.
Содержание PowerLever 455 Series
Страница 1: ...PowerLever 455x Operating Instructions...
Страница 37: ...37 Notes...
Страница 38: ...38 Notes...
Страница 39: ...39 Notes...
