21
Open the Lock with Access User Key
Step
Detailed Instructions
1.
Power lock.
Power the lock by depressing the outside lever.
2.
Insert Access User Key into
Insert the Access User Key into the lock key reader. If the Access User Key
key reader.
is programmed to not require a PIN (PIN length =0), the lock responds with
three beeps/flashes of the green LED to indicate avail able entry. Go to step
4. If the Key is that of an Access User whose has been disabled by manage-
rial personnel, the lock re sponds with two beeps/flashes of the red LED. If
the Access User Key is not valid, or if a holiday is in effect, or if the Key
Access User’s time windows do not allow entry at the time that the key is
applied, the lock responds with three beeps/flashes of the red LED.
If the Access User Key is programmed to require a PIN, the lock responds
with two beeps/flashes of the green LED.
Note: If the number of consecutive wrong tries defined in the lock is reached by repeatedly inserting an incorrect
key, the lock will shut down for the defined penalty time. During the shut down period, the lock will not respond to
any user actions. When the shut down period has elapsed the lock can be used nor mal ly. Any ad di tion al failed entry
attempt results in the lock being disabled again for the pro grammed shut down time. This cycle will continue until a
valid key is inserted.
3.
Enter Key Access User PIN.
Enter the four–digit PIN for the Key Access User. The lock responds with
three beeps/flashes of the green LED to indicate available entry. If the lock
PIN is not valid, the lock responds with two beeps/flashes of the red LED.
(Note: For a User who has not changed the default PIN, the lock will not open.)
Note: If the number of consecutive wrong tries for PIN entry defined in the key is exceeded, the Access User Key is
invalidated for use.
Caution: When opening the lock, do not depress the outside lever until the lock responds with three beeps/flashes
of the green LED to indicate available entry.
4.
Open lock.
Before re-lock time expires, depress the outside lever to open the lock. At
the end of the re-lock interval the lock will respond with two simultaneous
beep/flashes of the red and green LEDs.
Issue Service User Combination
This operation issues a one-time combination for a Service User that can be used to open the lock.
Note: As many Service Users can be activated as there are available keypad user table spaces in the lock.
Step
Detailed Instructions
1.
Power lock.
Power the lock by depressing the outside lever.
2.
Enter Master User or a
Enter the Master User or a Manager User combination. The lock will beep/
Manager User combination.
flash the green LED on each keystroke entered. If the Clear key is pressed
during data entry, the lock responds with one beep/flash of the green LED
fol lowed by the red LED, and all digits of the com bi na tion must be re-
entered.
The lock re sponds with three beeps/flashes of the green LED to indicate
available entry. If the combination is not valid, the lock responds with three
beeps/flashes of the red LED.
3.
Press then 92.
Before re-lock time expires, press (Enter key) followed by the 9 key and
then the 2 key. The lock re sponds with two beeps/flashes of the green LED.
Содержание PowerLever 455 Series
Страница 1: ...PowerLever 455x Operating Instructions...
Страница 37: ...37 Notes...
Страница 38: ...38 Notes...
Страница 39: ...39 Notes...
