K-Sonic KS-2010, Руководство по эксплуатации

Страница: 17 / 54

16
44 Puller Roller Frame
The mechanism supporting the upper puller roller.
It can lift up upper puller roller when working on
shaped pieces.
45 Puller Roller Lever
Pushing away from operator, the puller roller will
be lifted up. Pulling towards the operator, it will
be lowered down.
46 Upper Feed Roller
It straightens the finished workpiece from the
working roller. It is synchronized with the working
roller.
47 Paper Strip Plate
To prevent the fabric to interfere with the lower
feed roller.
48 Lower Feed Roller
It straightens the finished workpiece from the
working roller. It is synchronized with the working
roller.
Caution: The pressure between upper & lower
feed roller must be uniform and the interjacent
line must be paralleled with horn surface.
49 Horn
Transmits and amplifies the ultrasonic vibration
energy from the booster horn to upper working
surface.
50 Booster Outer Bracket To support and fix the transducer kit.
51 Booster Inner Bracket To support and fix the transducer kit.
52
Plastic Washer
To restrain the noise of resonance from the
vibration.
53 Transducer Kit
Including the transducer and booster. Transforms
the electrical oscillation energy to mechanical
vibration energy.
Caution: There are 2 cooling fans besides each
horn and transducer to keep them cool, thus to
prevent the damage of the horn and transducer.
Warning: There is a high electric voltage inside
the transducer. Do not touch except by
authorized
technician.
54 Rotary Barrel To support and rotate the transducer kit.
55 Carbon Brush Holder
For fixing the carbon brushes to transmit the
electrical power to the rotating transducer
mechanism.
Caution: Because the carbon keeps on touching
and rubbing against the conductive brass ring
around the rotating transducer, it is necessary to
clean the surface of both brass rings and carbon
brushed periodically so as to be sure of a good