K-Sonic KS-2010, Руководство по эксплуатации

Страница: 28 / 54

27
2 PIN
10 PIN
FUSE FUSE
KING ULTRASONIC CO.,LTD
ULTRASONIC LACE
SEWING MACHINE
2 PIN
I
O
焊頭轉速調整
連續/腳踏開關
5
6
4
2
3
1
0
5 7 7
電源指示燈
6
過載指示燈
功率調整
4
2
3
1
0
8
10
9
花輪轉速調整
振幅表
8
10
9
A
8 4
6
5 7
2
3
1
10
9
0
D. KS-2010, KS-3010 (Generator & Control Unit)
Item Parts Name Function Description
1
Horn Speed Adjusting
Knob
The knob for adjusting the speed of tool horn. The
speed setting used depends on the materials,
pattern of roller, pressure of roller and the power
setting of horn vibration. It should be adjusted to
match the feeding speed of roller if possible.
Otherwise, the tool horn surface will be easily
scratched by the roller.
2
Roller Speed Adjusting
Knob
The knob for adjusting the feeding speed of
sealing roller and puller roller. It should be
adjusted to match the feeding speed of tool horn.
The feeding speed will be increased as the knob is
rotated clockwise.
3 Output Adjusting Knob
The knob for adjusting ultrasonic vibration
amplitude. The higher the setting, the easier the
working is. Usually, it is set at scale 8. When
turning the knob clockwise, the amplitude will
increase, and the needle in the ampere meter will
rise up.