K-Sonic KS-2010, Руководство по эксплуатации

Страница: 41 / 54

40
5. Thickness of the working material: With same raw materials, higher pressures
are needed for thicker materials.
6. Processing speed: High pressure for high speed
※
If quality items are to be processed, the operator needs to review factors
leading to bad processing. Do not try to solve the problem by increasing
the roller pressure. If the pressure is too high, it will accelerate the wear
on the surfaces of the HORN and the blade patterns on the roller, thus
reduce the machines life.
※
As long as the processing quality of the working material is good, adjust
the pressure to be as low as possible to increase the lifespan of the HORN
and the ROLLER.
D. If the pointer in the ampere meter on the generator exceeds 1.5A, it indicates
that the ultrasonic oscillator system is abnormal. Please stop the machine and
restart after examination. Otherwise the oscillator system can overheat and
damage the machine
E. When using the machine with a 220V-AC power supply, the voltage should be
regulated within 200V-240V. 110V-AC power supplies should be regulated
within 100V-120V.