11
4.2 Display images from streamcorders
Streamproducer can record and cast (stream) live images from streamcorders. First you must connect
Streamproducer (your PC) with from one to four streamcorders. Up to four streamcorders can be connected at
a time; each streamcorder’s image is shown on its own video display window in the Streamproducer desktop.
4.2.1 Connecting to streamcorders
..
x
Click [Connect] button on any one of the video display windows that show “No Setting” in the title bar.
‘No Setting indicates that no streamcorder is connected or no file is opened in that window.
x
The Streamcorder setting dialog box appears.
x
Enter the streamcorder’s IP address and click [OK]. (Note: The menu button only appears in windows
that already are connected to a streamcorder or are displaying a file)
x
In most cases, the default port number will be satisfactory. If you cannot connect to the streamcorder
with the default settings you may need to change one or more port settings.
You will not need to change the port numbers if you connect the streamcorder directly to
Streamproducer and both are in their factory default condition.
It may be necessary to specify the port number if
there are network devices like routers between the
streamcorder and Streamproducer. Ask your network
administrator for more detail. In addition, some
firewalls may require port setting changes.
If you need to change the port numbers, click on the
[Detail>>] button of the streamcorder setting dialog
and from the window shown here, specify the port
number for the streamcorder and for
Streamproducer.
For the details on the setting, please read the
Network Pack Setup chapter of your Network Pack
User's Guide.
Set the port numbers using the following definitions
and guidelines:
12
Port Number [Streamcorder] -
Enter the port numbers specified on the streamcorder. The
streamcorder port numbers must match the Streamproducer port number settings.
RTSP:
Enter the port number for RTSP connection (TCP). This number is specified on
streamcorder. You will not be able to connect to the streamcorder if you enter the different port
number from that specified on the streamcorder.
HTTP:
Enter the port number for HTTP connection.
Port Number [Streamproducer] –
RTSP:
Enter the port number for RTSP connection (TCP). This is the port number for which
Streamproducer sends the RTSP commands to the streamcorder.
RTP:
Enter the port number for RTP connection (UDP). This is the port number that
Streamproducer uses to receive streaming video data from the streamcorder.
Connect timeout: –
Specify the time limit of TCP connection to complete when Streamproducer
connects a to a streamcorder. Streamproducer will quit trying to connect with the streamcorder if
the connection can not be completed within the specified time. Change the timeout longer if
Streamproducer takes longer time to complete the connection with a streamcorder.
x
Click [OK] button when you finished setting.
x
The ‘Name Setting’ dialog appears. The host name of the streamcorder is shown as the Name.
A folder with this name is created on your computers’ hard drive
where the image clips are recorded and stored.
x
Enter the streamcorder name and click [OK] button. If you have set
a streamcorder name from the streamcorder’s menu, this name will
appear here. Streamproducer is now connected to the
streamcorder. And the window should now look like this:
The streamcorder name (and image size) is shown above of the video display window.
Operation buttons appear above of the video display window.
You can see more information about the streamcorder currently connected by clicking on the [Menu] button
and choosing [Property...].
It is possible to change to another streamcorder by clicking on the [Menu] button and choosing [Other
Streamcorder...].
If the window size is too small to display all operation buttons, you can show the hidden buttons by clicking on
the double arrows (>>) on the right side of the button bar.
Streamcorder name
and image size
Operation buttons
Содержание KA-DV350U
Страница 50: ......