JVC KA-DV350U, Инструкция по эксплуатации

Страница: 30 / 64

When turning the power on, the card status display
shown on left will flash during initialization.
• Check to make sure the ACCESS
lamp of KA-DV350 is off.
• The ACCESS lamp will light when
the card is in operation.
Removing
• Make sure the power of GY-
DV300 is off when inserting/
removing a LAN card. Inserting/
removing a card with the unit
power on may damage the data
storage section of the LAN card
itself.
• Do not remove the power cable
with the power of the GY-DV300
on. Recorded section on the LAN
Card itself may be damaged as a
result.
• Do not use the wireless LAN card
continuously for more than 48
hours.
KA-DV350
ACCESS lamp
Card slot
EJECT button
LCD screen
C F
LAN card
1.
Turn off the GY-DV300 power.
2.
Insert a card into the KA-DV350 card slot.
3.
Turn on the GY-DV300 power.
Card status according to the inserted card type is displayed on
the LCD screen/viewfinder screen. (
☞
page 8)
Card status display
1.
Turn off the GY-DV300 power.
2.
Press the EJECT button of KA-DV350 and remove the card.
Connection
Installing the wired/wireless
LAN card
Inserting
42
INTR
ODUCTION
PREP
ARA
TION
OPERA
TION
O
THERS
Caution
Memo Memo
Memo Memo
e
C F
: No card
: LAN card
: CF card
Setup of the PC
Setting up the proxy server
43
It is necessary to select whether to use a proxy server or not depending on the network environment.
To determine if you are using a proxy server.
1.
From Internet Explorer, click on the ‘Tools’ in the menu bar,
and then click on ‘Internet Options’.
2.
From the window that opens, click on the ‘Connections’ tab.
3.
From the ‘Connections’ window, click on the ‘LAN Settings’
button.
4.
If ‘Use a proxy server’ is checked in the window that opens,
then you use a proxy server to access the Internet.
• If this is not checked, then you don’t use a proxy server, and
your configuration is complete.
5.
Click on the ‘Advanced’ button.
6.
In the ‘Exceptions’ box of the window that opens, enter the
first portion of the KA-DV350’s IP address followed by.‘*.*’ For
ex-ample, the IP address of a KA-DV350 may be
192.168.100.101, so 192.168.*.* has been entered
7.
Click ‘OK’ in all open windows.
• When setting the NETWORK
PACK SETUP screen (CAM & VTR
CONTROL, NETWORK SETUP,
PORT SETUP or ENCODE PA-
RAMETERS) and the same menu
screen is displayed on the LCD
screen or viewfinder of GY-DV300,
values set in the NETWORK PACK
SETUP screen will not appear on
menu screen of the LCD screen
or the viewfinder of GY-DV300.
The values set in the NETWORK
PACK SETUP screen will appear
after the menu screen of GY-
DV300 is closed once and re-
opened.
INTR
ODUCTION
PREP
ARA
TION
OPERA
TION
O
THERS
Memo Memo
• When using peer-to-peer communication that directly connects the PC
and KA-DV350, deselect the “Use a proxy server” checkbox.
• When the “Use a proxy server” setting must be enabled due to a LAN
environment (in-company LAN, etc.) click “Advanced...” and input the IP
address of GY-DV300 in “Exceptions” of the “Use a proxy server”
setting.
Memo Memo