“NO CF FORMAT!” will appear if
t h e i n s e r t e d C F c a r d i s n o t
formatted. Format the card in the
MOVIE CLIP SET menu screen.
(
☞
page 46)
W
T
ST
ART/
ST
OP
POWER
OFF
ON
MODE
CAM-B
VTR
SHUTTER
GAIN
CAM-A
BAR
Recording video on a DV cassette tape and CF card
1.
Turn on the GY-DV300 power.
Check to see that the
C F
display appears on the LCD screen/
viewfinder screen. (When the power is turned on,
display
will flash during initialization.)
2.
Insert a recordable DV cassette tape.
3.
Set the MODE switch to “CAM-A” or “CAM-B”.
4.
Set the NETWORK PACK CONFIG menu screen.
• Set MPEG REC to “TRIG”.
• Set the video/audio compression in the ENCODE SETUP
menu screen. (
☞
page 18)
• When completed with settings, press the MENU button to
return to the normal screen.
5.
Press the REC START/STOP button on GY-DV300 to start re-
cording on the DV cassette tape as well as video/audio stream-
ing data on the CF card.
• During CF card recording,
C F
display will light red.
• To stop recording, press the REC START/STOP button.
• To resume recording, press the REC START/STOP button
once more.
6.
To end recording, press the REC START/STOP button.
REC START/STOP button
REC START/STOP button
POWER
switch
MODE
switch
Handle
<GY-DV300 rear panel>
C F
NE T WOR K
OR
T W
E
N
K
A CK
P
ON
C
I G
F
E N CO DE
MPE G R EC
T R G
I
MOV I E CL I P
MENU R E S E T
PAGE B ACK
T
. .
S E
P
U
T
. .
S E
P
U
T
. .
S E
P
U
M A I N
( WMP u n d r 8 ) ( C F V i e w e r )
e
CA NCE L
NETWORK PACK CONFIG
menu screen
ENCODE SET menu
screen
LCD screen
Set to TRIG
48
Using the CF
(Compact Flash)
Card
Recording
INTR
ODUCTION
PREP
ARA
TION
OPERA
TION
O
THERS
C F
: Red display during
recording
: Initializing
Memo
Memo
A
OVER
C F
LCD screen
CF card remaining
warning
• When the DV cassette tape has reached the end during recording, CF
card recording will also stop.
• When recording to a CF Card while in the TRIG mode, clip list (CSV file)
will be created for viewing using the CFViewer.
The CSV file name will be the value of the user’s bit (UB) set in GY-DV300.
CFViewer will not function properly when there are frequent changes in
the UB value (when using UB as the time code). For details concerning
UB, please refer to the operator’s manual of GY-DV300.
• Video recorded on a CF Card will start slightly slower than that recorded
on tape.
• The CF card remaining warning is displayed on the LCD screen/viewfinder
screen. (
☞
page 9)
• If recording into the CF card is carried out within 5 seconds, either a file
cannot be made or it becomes difficult to display a thumbnail (a still picture
displayed when CLIP FILE is selected).
• Do not switch over the CAM/VTR mode during recording into the CF card.
If the mode is switched over during recording, the display of the LCD
viewer can go wrong once in a while. Also, if the mode is switched over
immediately after the start of recording into the CF card, some black
images can be mixed into a recorded picture.
Before turning off the power,
check to make sure the
C F
indicator on the LCD screen is
white.
Turning the power off when the
C F
indicator is red will damage
the recorded clip file.
Recording video on a DV cassette tape and CF card (cont)
49
Using the CF
(Compact Flash)
Card
Recording
INTR
ODUCTION
PREP
ARA
TION
OPERA
TION
O
THERS
Caution
Memo
Memo
Содержание KA-DV350U
Страница 50: ......
