W
T
ST
ART/
ST
OP
POWER
OFF
ON
MODE
CAM-B
VTR
SHUTTER
GAIN
CAM-A
BAR
1.
Set MPEG REC in the NETWORK PACK CONFIG menu to
“TRIG” or “SPLIT” using steps 1 to 8 of page 21.
• TRIG: Records/transmits video/audio streaming data to your
PC at the same time as the recording to the DV cassette
tape set in GY-DV300.
• SPLIT: Records/transmits video/audio streaming data to your
PC regardless of whether the DV cassette is set.
2.
Click the CAPTURE-TRIG./CAST-TRIG. button in the
Streamcapture screen.
• Button lights and the program enters the trigger standby
mode.
• When the CAPTURE-TRIG. button is on:
Saves the video/audio from KA-DV350 to your PC by syn-
chronizing to the button operations of GY-DV300.
• When the CAST-TRIG. button is on:
Transmits video/audio from KA-DV350 to another PC by
synchronizing to the button operations of GY-DV300.
• When saving and transmitting video/audio at the same
time, light both CAPTURE-TRIG. and CAST-TRIG. buttons.
3.
Turning trigger on
• When KA-DV350 is in the TRIG mode:
Press the REC START/STOP button of GY-DV300.
• When KA-DV350 is in the SPLIT mode:
Press the SELECT dial of GY-DV300.
• Saving of file or transmission will start on the PC.
4.
Turning trigger off
• When KA-DV350 is in the TRIG mode:
Press the REC START/STOP button of GY-DV300.
• When KA-DV350 is in the SPLIT mode:
Press the SELECT dial of GY-DV300.
• File recording on the PC will end. Furthermore, Transmitted
video screen will display color bars.
The Trigger Mode function can be used to save and transmit video/audio from KA-DV350 to your PC by synchronizing to
the button operations of GY-DV300.
REC START/STOP button
REC START/STOP button
POWER
switch
MODE
switch
Handle
GY-DV300 rear panel
CAPTURE-TRIG.
button
NETWORK MAIN SETUP
menu screen
(
☞
page 14)
NETWORK PACK CONFIG
menu screen
NET WOR K
T
. .
. .
. .
S E
OR
T W
E
N
K
A CK
P
ON
C
I G
F
E N CO DE S E T
MPE G R EC
T R G
I
MOV I E CL
8
I P
P
S E T
( WM
U
P
U
MA N
I
P
U
) ( C F V i e w e r )
u n d
P
e r
MENU R E S E T
C AN C E L
PAGE B ACK
Setting
CAST-TRIG.
button
Synchronizing with the button operations of GY-DV300
72
INTR
ODUCTION
PREP
ARA
TION
OPERA
TION
O
THERS
Receiving Camera Images via LAN
Using a simplified viewer
(Streamcapture)
INTR
ODUCTION
PREP
ARA
TION
OPERA
TION
O
THERS
73
The Cast function can be used to send video/audio of KA-DV350 from this PC to another PC.
CAST-
CAM
button
CAST-
BARS
button
Sending method
Display the video to send in the video display window of the Streamcapture
screen and click the CAST-CAM button.
<Color bar transmission>
When clicking the BARS button, color bars are transmitted rather than the
video from KA-DV350.
• Video of the receiving side will be displayed with color bars.
• Click the CAST button to switch back to the transmission of video from
KA-DV350.
• To stop the transmission of video from KA-DV350/color bars, turn off the
CAST-CAM/CAST-BARS button.
In this case, the connection with the receiving side will be disconnected.
<Trigger transmission>
When transmitting video/audio from KA-DV350 to another PC by synchro-
nizing to the button operations of GY-DV300, click the CAST-TRIG. button.
(
☞
page 73)
CAST-
TRIG.
button
Video from KA-DV350 will be dis-
played in the video display of the
Streamcapture screen. Color bars
will not be displayed.
Distributing Camera Images via LAN
Distributing the video data
captured by the GY-DV300
Memo
Memo
Содержание KA-DV350U
Страница 50: ......
