CONFIGURATION WIZARD
9
3- CONFIGURATION WIZARD
If Voice Mail has already been setup, do not run the configuration wizard,
as the setup will be reinitialized.
After the reset, go into Programs in the start menu. You will find a group of
programs
“Voice System 5”
. Select the group, and then select Voice System 5
from the options available. The following screen appears.
Note:
During installation this box should remain checked and the system date and
time will be taken from the PC in which installation is made. This may be
modified later by starting the Voice Mail program and unchecking the box, and
then modifying these parameters by telephone or via an Internet browser
(see
Sections 2.2.2 and 4.5.2 of the Administration Manual respectively)
.
•
Open the “COM Port” combo box, select the corresponding port to be used
and click
OK
.
Alternatively, if an Ethernet crossover cable has been connected, select
IP
Access
, enter the IP address to be assigned to the unit and click
Assign IP
.
•
Open the “File” menu and select “Configuration Wizard” or click the icon.
