SOFTWARE INSTALLATION
7
2- SOFTWARE INSTALLATION
The vocal server´s setup program allows the unit to be configured via PC.
Note:
The setup program is a 32-bit Windows application which runs in WinNT, 2000,
2003, XP and Vista and may be used on any PC that has one serial port
available, and a minimum screen resolution of 800x600.
•
Connect the unit to the adapter provided and to a PC serial port via the DB9
cable. The “ON/OFF” LED (“ON/HD” for the rack version) will light, followed a
few seconds later by the “STATUS” LED, indicating that the unit has started
up correctly.
•
Make sure there are no applications open in the PC.
•
Insert the
CD-ROM
supplied with the unit. The CD is equipped with a boot file
to initiate system installation automatically.
•
If the CD does not start up automatically, click
Start
followed by
Run
.
•
Type
“X:\Install\setup.exe”
(where X represents your CD ROM drive which
is usually “D”) and press
Enter
or click
OK
. The following screen will appear.
•
Click
Next
to move to the following screen. This screen allows you to select
the sub-directory in which the unit’s setup program will be installed.
