51
When converting to a different type of gas there is need
for an additional setting of the amount of gas or for a
replacement of jets resp. (see charts I to VII).
CONNECTION TO LPG
A metallically sealed connection piece 8 x 1 mm must be
fitted to the R
1
/
2
“ gas supply socket. When doing so
please focus on leakage testing .
REPLACEMENT OF OPEN BURNER
HIGH-BURNER JETS
-
Remove pot rest, burner cap and burner chalice.
-
By means of a wrench replace the high-burner jets
acc. to indications and descriptions in charts I to VII.
CONVERSION OR REPLACEMENT
OF LOW-BURNER JET
-
Remove pot rests, hob unit covers and burner
chalices.
-
Loosen the fastening screws of the hob unit and
remove.
-
Loosen the 3 each visible fastening screws of the
open burners. Remove the hob unit.
-
Draw off the control knobs to the front.
-
Unscrew the fastening screws of the control panel.
-
Set or replace resp. the low-burner jet acc. to charts
I to VII.
-
Re-install in reverse sequence.
FO 0068
Fig. 22
FO 0392
Fig. 20
FO 0069
Fig. 21
low-burner jet
CONVERSION TO OTHER TYPE OF GAS
