Juniper SRX 210, Руководство по оборудованию

Страница: 115 / 204

Table 28: Quick Configuration Set Up Summary (continued)
Your Action Function Field
To add an IP address, type it in the box to the left
of the Add button, then click
Add .
To delete an IP address, click on it in the box above
the Add button, then click
Delete .
Specifies an NTP server that the services
gateway can reach to synchronize the system
time. NTP Servers
■
To immediately set the time using the NTP
server, click
Set Time via NTP . The services
gateway sends a request to the NTP server and
synchronizes the system time.
NOTE: If you are configuring other settings on this
page, the services gateway also synchronizes the
system time using the NTP server when you click
Apply or OK .
■
To set the time manually, click Set Time
Manually . A window allows you to select the
current date and time from lists.
Synchronizes the system time with the NTP
server or allows you to manually set the system
time and date. Current System Time
Network
To add an IP address, type it in the box to the left
of the Add button, then click
Add .
To delete an IP address, click on it in the box above
the Add button, then click
Delete .
Specifies a DNS server that the services
gateway can use to resolve hostnames into
addresses. DNS Name Servers
To add a domain name, type it in the box to the left
of the Add button, then click
Add .
To delete a domain name, click on it in the box
above the Add button, then click
Delete .
Adds each domain name that includes the
services gateway to the configuration so that
each domain is included in a DNS search. Domain Search
Type a 32-bit IP address in dotted decimal notation. Defines a default gateway through which to
direct packets addressed to networks not
explicitly listed in the routing table. Default Gateway
Type a 32-bit IP address and prefix length in dotted
decimal notation. Defines a reserved IP address that is always
available on the services gateway. If no address
is entered, this address is set to
127.0.0.1/32 .
Loopback Address
Management Access
To enable Telnet access, select the box. Allows remote access to the services gateway
using Telnet. Allow Telnet Access
To enable JUNOScript access over cleartext, select
the box. Allows JUNOScript to access the services
gateway using a protocol for sending
unencrypted text over a TCP connection. Allow JUNOScript
over Clear-Text
Access
To enable SSH access, select the box. Allows remote access to the services gateway
using SSH. Allow SSH Access
Related Topics
SRX 210 Services Gateway Basic Connectivity Overview on page 78
■
■
Connecting an SRX 210 Services Gateway to the J-Web Interface on page 86
Configuring Basic Settings for the SRX 210 Services Gateway with J-Web Quick Configuration
■ 95
Chapter 10: Establishing Basic Connectivity for the SRX 210 Services Gateway