Juniper SRX 210, Руководство по оборудованию

Страница: 63 / 204

Table 18: Site Preparation Checklist for the SRX 210 Services Gateway Installation (continued)
Notes Date Performed By Additional Information Item or Task
Plan the installation
location, including
required space
clearances and airflow
requirements.
Cables
“Interface Cable and Wire
Specifications for the SRX 210
Services Gateway” on page 161 Acquire cables and
connectors.
Review the maximum
distance allowed for
each cable. Choose the
length of cable based
on the distance
between the hardware
components being
connected.
Plan the cable routing
and management.
Related Topics
■
SRX 210 Services Gateway Chassis on page 11
■
Installation Overview for the SRX 210 Services Gateway on page 49
■
General Site Guidelines for Installing the SRX 210 Services Gateway on page 43
■
SRX 210 Services Gateway Cabinet Requirements on page 44
■
SRX 210 Services Gateway Rack Requirements on page 45
■
Clearance Requirements for Airflow and Hardware Maintenance of the SRX 210
Services Gateway on page 46
General Site Guidelines for Installing the SRX 210 Services Gateway
Take the following precautions to help you plan an acceptable operating environment
for your SRX 210 services gateway and avoid environmentally caused equipment
failures:
■
For the cooling system to function properly, the airflow around the chassis must
be unrestricted. Allow sufficient clearance on both sides of the device and back
of the chassis where ventilation holed are located and adjacent equipment.
Ensure that there is adequate circulation in the installation location.
■
Follow the ESD procedures to avoid damaging equipment. Static discharge can
cause components to fail completely or intermittently over time. For more
information, see “SRX 210 Services Gateway General Safety Guidelines and
Warnings” on page 133.
General Site Guidelines for Installing the SRX 210 Services Gateway
■ 43
Chapter 3: Preparing the Site for the SRX 210 Services Gateway Installation