Juniper SRX 210, Руководство по оборудованию

Страница: 36 / 204

Table 6: SRX 210 Services Gateway Front Panel Components (continued)
Usage Description Location Component Number
This LED provides
information on the
functioning of the
ExpressCard slot. The ExpressCard LED has
the following indicator
colors:
■
Green and steadily on
indicates that the
ExpressCard is plugged
in and data call is
established.
■
Red and steadily on
■
Indicates that the
ExpressCard
plugged in is
faulty or not
detected by the
device.
■
Indicates that the
ExpressCard is
plugged in but not
registered with
the Network.
■
Yellow and steadily on
indicates that the
ExpressCard is plugged
in and registered with
the Network.
■
Off indicates that the
ExpressCard is not
plugged in.
Left side of the front
panel ExpressCard LED 7
The power button has status
indicators on the front panel
that indicate whether the
power supply is functioning
normally. The power button powers
the device on and off. Left side of the front
panel Power button 8
The Reset Config button is
used to remove the current
configuration and reset the
device to the default
configuration.
The button is recessed in the
front panel to prevent it from
being pressed accidentally.
Pressing and holding the
Reset Config button for 15
seconds or more deletes all
configurations on the device
and loads and commits the
factory configuration.
The Reset Config button
returns the device to the
default configuration. Recessed in the left side
of the front panel Reset Config button 9
16 ■
SRX 210 Services Gateway Front Panel
SRX 210 Services Gateway Hardware Guide