Juniper QFX5220 Скачать руководство пользователя страница 109

Страница: 109 / 247

QFX5220 Installation Safety Guidelines

The weight of a fully loaded QFX5220-32CD chassis is approximately 24.5 lb (11.11 kg) with power

supplies and fans installed. The weight of a fully loaded QFX5220-128C is approximately 76 lbs (34 kg).

Observe the following guidelines for lifting and moving a QFX5220:

CAUTION:

If you are installing the QFX5220 above 60 in. (152.4 cm) from the floor,

either remove the power supplies, fan modules, and any expansion modules before

attempting to install the switch, or ask someone to assist you during the installation.

•

Before installing a QFX5220, read the guidelines in

“QFX5220 Site Preparation Checklist” on page 81

to verify that the intended site meets the specified power, environmental, and clearance requirements.

•

Before lifting or moving the QFX5220, disconnect all external cables.

•

As when lifting any heavy object, lift most of the weight with your legs rather than your back. Keep your

knees bent and your back relatively straight and avoid twisting your body as you lift. Balance the load
evenly and be sure that your footing is solid.

Содержание QFX5220
























































































































































































































































Результаты поиска

Содержание QFX5220

Отзывы:

Juniper QFX5220, Руководство по оборудованию, Страница: 109 / 247

Результаты поиска

Содержание QFX5220

Отзывы: