Juniper QFX5220 Скачать руководство пользователя страница 105

Страница: 105 / 247

USB Port Specifications for the QFX Series

The following Juniper Networks USB flash drives have been tested and are officially supported for the

USB port in the QFX Series:

•

RE-USB-1G-S—1-gigabyte (GB) USB flash drive (except QFX3100 Director device)

•

RE-USB-2G-S—2-GB USB flash drive (except QFX3100 Director device)

•

RE-USB-4G-S—4-GB USB flash drive

CAUTION:

Any USB memory product not listed as supported for the QFX Series has not

been tested by Juniper Networks. The use of any unsupported USB memory product

could expose your device to unpredictable behavior. Juniper Networks Technical

Assistance Center (JTAC) can provide only limited support for issues related to

unsupported hardware. We strongly recommend that you use only supported USB flash

drives.

CAUTION:

Remove the USB flash drive before upgrading Junos OS or rebooting a QFX

Series device. Failure to do so could expose your device to unpredictable behavior.

NOTE:

Executing the request system snapshot CLI command on a QFX3500 device requires an

external USB flash drive with at least 4 GB of free space. We recommend using the RE-USB-4G-S

flash drive.

NOTE:

USB flash drives used with the QFX Series device must support USB 2.0 or later.

Содержание QFX5220
























































































































































































































































Результаты поиска

Содержание QFX5220

Отзывы:

Juniper QFX5220, Руководство по оборудованию, Страница: 105 / 247

Результаты поиска

Содержание QFX5220

Отзывы: