Juniper QFX5220 Скачать руководство пользователя страница 169

Страница: 169 / 247

4. Disconnect power to the switch by performing one of the following tasks:

•

AC power supply—If the AC power source outlet has a power switch, set it to the OFF (O) position.

If the AC power source outlet does not have a power switch, gently pull out the male end of the

power cord connected to the power source outlet.

5. Remove the power source cable from the power supply faceplate:

•

AC power supply—Remove the power cord from the power supply faceplate by detaching the power

cord retainer and gently pulling out the female end of the power cord connected to the power supply

faceplate.

•

DC power supply—Remove the screws securing the ring lugs attached to the power source cables

to the power supply using the screwdriver, and remove the power source cables from the power

supply. Replace the screws on the terminals and tighten them.

6. Uncable the switch before removing it from the rack or cabinet.

Содержание QFX5220
























































































































































































































































Результаты поиска

Содержание QFX5220

Отзывы:

Juniper QFX5220, Руководство по оборудованию, Страница: 169 / 247

Результаты поиска

Содержание QFX5220

Отзывы: