Juniper QFX5220 Скачать руководство пользователя страница 128

Страница: 128 / 247

WARNING:

Ensure that the power cord does not block access to device components

or drape where people can trip on it.

4. If the AC power source outlet has a power switch, set it to the OFF (O) position.

NOTE:

The switch powers on as soon as power is provided to the power supply. There is no

power switch on the device.

5. Insert the power cord plug into an AC power source outlet.

6. If the AC power source outlet has a power switch, set it to the ON (|) position.

7. Verify that the AC and DC LEDs on each power supply are lit green.

If the amber fault LED is lit, remove power from the power supply, and replace the power supply (see

“How to Remove a Power Supply from a QFX5220” on page 157

). Do not remove the power supply

until you have a replacement power supply ready: the power supplies must be installed in the switch

to ensure proper airflow.

131

Содержание QFX5220
























































































































































































































































Результаты поиска

Содержание QFX5220

Отзывы:

Juniper QFX5220, Руководство по оборудованию, Страница: 128 / 247

Результаты поиска

Содержание QFX5220

Отзывы: