Juniper QFX5220 Скачать руководство пользователя страница 113

Страница: 113 / 247

CAUTION:

the installation base data if there is any addition or change to the installation base or if

the installation base is moved. Juniper Networks will not be held accountable for not

meeting the hardware replacement service-level agreement for products that do not

have registered serial numbers or accurate installation base data.

https://tools.juniper.net/svcreg/SRegSerialNum.jsp

Update your installation base at

https://www.juniper.net/customers/csc/management/updateinstallbase.jsp

Mounting a QFX5220 in a Rack or Cabinet

IN THIS SECTION

Before You Begin Rack Installation | 117

Four-Post Installation Procedure for QFX5220-128C | 118

Four-Post Installation Procedure for QFX5220-32CD | 120

You can mount QFX5220 switches only on a four-post 19-in. rack or cabinet using the rack mount kit

provided with the switch. The rack mount kit can be adapted for either a four-post rack-only or a rack and

cabinet installation. A four-post installation evenly supports the switch by all four corners.

For four-post rack or cabinet installations, the mounting kit contains two front mounting rail assemblies

and two rear mounting blades that match the front mounting rails. This configuration allows either end of

the switch to be mounted flush with the rack and still be adjustable for racks with different depths.

The front and rear rack rails must be spaced between 28 in. (71.1 cm) and 36 in. (91.4 cm) front to back.

This topic describes:

116

Содержание QFX5220
























































































































































































































































Результаты поиска

Содержание QFX5220

Отзывы:

Juniper QFX5220, Руководство по оборудованию, Страница: 113 / 247

Результаты поиска

Содержание QFX5220

Отзывы: