Juniper NETWORK AND SECURITY MANAGER 2010.4 - REV1, Руководство по установке

Страница: 183 / 244

8.
Enter the following command to unzip the files (
nsm2010.4_servers_linux_x86.sh
,
upgrade-os.sh
) and create a directory (
apps-rpms
) in which NSM saves the unzipped
files.
unzip nsm2010.4_servers_upgrade_rs.zip
9.
Enter the following command to start the installation.
sh upgrade-os.sh nsm2010.4_servers_linux_x86.sh Offline
The installer begins a series of preinstallation checks that ensure:
• You are installing the correct software for your operating system.
• All the necessary software binaries are present.
• You correctly logged in as root.
•
You have installed a version of NSM earlier than the current version you are installing.
•
The system has sufficient disk space and RAM.
NOTE: The management system installer indicates the results of its
specific tasks and checks:
• “Done” indicates that the installer successfully performed a task.
• “OK” indicates that the installer performed a check and verified that the
condition was satisfied.
• “FAILED” indicates that the installer performed a task or check, but it
was not successful. See the install log for information about the failure.
This log is usually stored in
/usr/netscreen/DevSvr/var/errorLog
. If the
failure happens in the early stages of installation, the log might be in
/tmp .
The installer then stops any running servers.
10.
Type 2 to specify that you want to upgrade both the Device Server and the GUI Server.
NOTE: If you specify that you want to upgrade the Device Server and the
GUI Server, all data previously configured in the system is restored. If you
do not want to restore your previous configuration data, choose to have
the installer perform a clean install of NSM.
11.
The installer next prompts you to configure additional options specific to your
installation during the upgrade. These options can include:
•
Configuring high availability
• Configuring interoperability with NetScreen Statistical Report Server
161 Copyright © 2010, Juniper Networks, Inc.
Chapter 7: Upgrading NSM Appliances to NSM 2010.4