Juniper NETWORK AND SECURITY MANAGER 2010.4 - REV1, Руководство по установке, Страница: 156 / 244

Table 17: Standalone Configuration—System Parameters (continued)
Your Value Description Parameter
Total number of database backup files that the GUI
Server stores. When the GUI Server reaches the
maximum number of backup files you configure, it
overwrites the oldest file.
By default, the GUI Server stores seven backup files.
Number of Local
Database Backup Files
Stored
Distributed Configuration Parameters
Table 18 on page 134 describes additional system parameters that you need to identify if
you are upgrading a distributed configuration of the management system — GUI Server
and Device Server on separate server machines:
Table 18: Distributed Configuration — System Parameters
Your Value Description Parameter
Unique ID assigned when you add the Device Server. Device Server ID
Password assigned to the Device Server enabling it to
authenticate with the GUI Server when attempting to
connect. Password for GUI
Server Connection
HA Configuration Parameters
Table 19 on page 134 describes the system parameters that you need to identify if you are
upgrading a standalone configuration of the management system with HA enabled:
Table 19: HA Configuration — System Parameters
Your Value Description Parameter
IP address of the primary server participating in the HA
cluster. Primary HA Server IP
address
IP address of the secondary server participating in the
HA cluster. Secondary HA Server
IP address
Time interval with which you want the GUI Server to
replicate the database.
By default, the GUI Server replicates the database every
60 minutes.
HA replications
Number of heartbeat communication paths between
the primary and secondary machine.
By default, only one communication link exists between
the primary and secondary machines.
Heartbeat links
between primary and
secondary machine
Copyright © 2010, Juniper Networks, Inc. 134
Network and Security Manager Installation Guide