Juniper NETWORK AND SECURITY MANAGER 2010.4 - REV1, Руководство по установке, Страница: 131 / 244

d. Click the - button to remove recipients of the e-mail notification.
e. Click to select an e-mail address entry from the
To Email Address
list and click the
Edit button to edit the e-mail address.
6.
Click Apply when you are done.
To configure the Device Server Cluster:
1.
From the NSM UI, select Server Manager>Servers>Device Server , then click on the
Edit icon or right-click on the device server and select Edit to view all information
available on the device server.
2.
Use the
Server Type
list to select
Device Server Cluster
. The
HA
and
Email Notification
tabs become available.
3.
Select the HA tab. Configure the following parameters as shown in Figure 9 on page 109:
a. Enter the IP Address of the Secondary Server.
b. Enter the Secondary Device Server Manager Port (if applicable)
c. Enter the mapped IP Address and Port of the Secondary Server (if applicable)
Figure 9: Configuring the HA Device Server Cluster
4.
Click Apply when you are done.
5.
(Optional) Click to activate the
Email Notification
tab. Configure the following
parameters as shown in Figure 10 on page 110:
a. Enter the IP Address of the SMTP Server.
b. Enter the e-mail address referenced in the e-mail notification in the
From Email
Address
field.
109 Copyright © 2010, Juniper Networks, Inc.
Chapter 5: Installing NSM with High Availability