Juniper NETWORK AND SECURITY MANAGER 2010.4 - REV1, Руководство по установке, Страница: 177 / 244

CHAPTER 7
Upgrading NSM Appliances to NSM
2010.4
This chapter describes upgrading the management system on NSMXpress and NSM3000
Regional Servers; and NSM Central Manager (NSM CM) to Network and Security Manager
(NSM) 2010.4. This chapter also describes how to migrate your database from a Linux
or Solaris server to an NSM appliance, and provides instructions for changing user
privileges in the NSM appliance.
This chapter contains the following sections:
•
Upgrading NSM Regional Server and NSMCM Appliances on page 155
•
Migrating Data to an NSM Regional Server Appliance on page 165
• User Privileges on an NSM Appliance on page 169
Upgrading NSM Regional Server and NSMCM Appliances
Upgrading to NSM Release 2010.4 on an NSM Regional Server Appliance (Online mode)
This section describes upgrading to NSM 2010.4 on an NSM Regional Server appliance
if the appliance is connected to the Internet.
NSM 2010.4 requires a license file if you are managing more than 25 devices. You must
have the license file before performing the upgrade to NSM 2010.4. The NSM installer
will not proceed without the license file.
For information on the procedure for generating the license file, refer to “Generating the
NSM License Key File” on page 13.
Use the following procedure to upgrade to NSM 2010.4 on an NSMXpress or an NSM3000
Regional Server appliance.
1.
From the NSM Software Download page, click the Regional Server upgrade link to
download the appropriate NSMAppliance software. The downloaded file has the
name
nsm2010.4_servers_upgrade_rs.zip
.
2.
Copy this file onto your NSM appliance using FTP or SCP.
3.
Log in as the admin user, and enter n when prompted to run the setup wizard.
4.
Enter sudo su - and the admin password to gain root access.
155 Copyright © 2010, Juniper Networks, Inc.