Juniper NETWORK AND SECURITY MANAGER 2010.4 - REV1, Руководство по установке

Страница: 179 / 244

NOTE: If you specify that you want to upgrade the Device Server and GUI
Server, all data previously configured in the system is restored. If you do
not want to restore your previous configuration data, choose to have the
installer perform a clean install of NSM.
10.
The installer next prompts you to configure additional options specific to your
installation during the upgrade. These options can include:
• Configuring High Availability
• Configuring interoperability with NetScreen-Statistical Report Server
• Configuring backup options
•
Configuring the client download and NBI port
If applicable, follow the installer prompts to configure these options.
The script next prompts you to restart the servers when the installation is finished.
11.
Type y and press Enter to restart the servers when finished. Type n and press Enter ,
if you do not want to restart server processes.
The script prompts you to verify your upgrade configuration settings.
12.
Verify your settings. If they are correct, type y and press Enter to proceed. If settings
are incorrect, type n and press Enter to return to the original selection prompt.
The upgrade proceeds automatically. The installer performs the following actions:
• Extracts and decompresses the software payloads.
• Upgrades the Device Server.
• Upgrades the GUI Server.
•
Installs the HA Server.
•
Sets start scripts.
• Performs postinstallation tasks such as removing the staging directory and starting
the server processes (if configured).
Messages display the installation progress.
After the installation script finishes, it generates a log file with the output of the
installation commands for troubleshooting. The installer indicates the name of the
installation log file and the directory location where it is saved. This file is saved by
default in the
/usr/netscreen/DevSvr/var/errorLog subdirectory.
13.
After the successful installation, copy the installer file nsm2010.4_servers_linux_x86.sh
to the /var/install directory and enter the following commands:
rm -f NSM-RS
chmod 755 nsm2010.4_servers_linux_x86.sh
ln -s nsm2010.4_servers_linux_x86.sh NSM-RS
157 Copyright © 2010, Juniper Networks, Inc.
Chapter 7: Upgrading NSM Appliances to NSM 2010.4