Juniper JUNOSE 11.2.X MULTICAST ROUTING, Руководство по настройке

Страница: 89 / 256

•
P-bit errored seconds—Number of errored seconds encountered by a T3 (not
applicable for E3) in the current interval (this field is not present for E3 controllers)
•
Severely errored seconds—Number of severely errored seconds encountered by an
E3 (not applicable for T3) in the current interval (this field is not present for T3
controllers)
•
P-bit severely errored seconds—Number of severely errored seconds encountered
by a T3 (not applicable for E3) in the current interval (this field is not present for E3
controllers)
•
Severely errored frame seconds—Number of severely errored framing seconds
encountered by a T3 or E3 in the current interval
•
Unavailable seconds—Number of unavailable seconds encountered by a T3 or E3
in the current interval
•
Line code violations—Number of line code violations encountered by a T3 or E3 in
the current interval
•
P-bit coding violations—Number of coding violations encountered by a T3 (not
applicable for E3) in the current interval (this field is not present for E3 controllers)
•
Coding violations—Number of coding violations encountered by an E3 (not applicable
for T3) in the current interval (this field is not present for T3 controllers)
•
Line errored seconds—Number of line errored seconds encountered by a T3 or E3 in
the current interval
•
C-bit coding violations—Number of C-bit coding violations encountered by a T3 (not
applicable for E3) in the current interval (this field is not present for E3 controllers)
•
C-bit errored seconds—Number of C-bit errored seconds encountered by a T3 (not
applicable for E3) in the current interval (this field is not present for E3 controllers)
•
C-bit severely errored seconds—Number of C-bit severely errored seconds
encountered by a T3 (not applicable for E3) in the current interval (this field is not
present for E3 controllers)
•
Example 1
host1# show controllers t3 2/0
DS3 2/0
Description: boston09 hdlc channel
ifAdminStatus = ifAdminDown
snmp trap link-status = enabled
No alarms detected
Framing is C-BIT, Line Code is B3ZS, Clock Source is Line
Cable Length is 0 ft
Loopback Disabled
DSU Mode is Larscom
DSU Bandwidth is 4000
DSU Scrambler is off
MDL Transmit Path is not active
MDL Transmit Test-Signal is active
67 Copyright © 2010, Juniper Networks, Inc.
Chapter 2: Configuring T3 and E3 Interfaces