Juniper JUNOSE 11.2.X MULTICAST ROUTING, Руководство по настройке

Страница: 55 / 256

5/7(channelized) down down
5/8(channelized) down down
5/9(channelized) down down
5/10(channelized) down down
5/11(channelized) down down
3/0(channelized) down down
3/1(channelized) down down
3/2(channelized) down down
4/0:1/1(unchannelized) up down
4/2:1/1(channelized) up lowerLayerDown
•
Field descriptions for a T1 channel
•
Description—Text description or alias if configured for the interface
•
ifOperStatus—Physical state of the interface:
•
ifOperDown—Interface is not functioning
•
ifOperLowerLayerDown—Lower layer in the interface stack is not functioning
•
ifOperNotPresent—Module has been removed from the chassis
•
ifOperTesting—Interface is being tested
•
ifOperUp—Interface is functioning
•
Yellow Alarm detection—Status of yellow alarm detection: active or not active
•
Yellow Alarm generation—Status of yellow alarm generation: active or not active
•
snmp trap link-status—Status of SNMP trapping (enabled or disabled)
•
Framing—Type of framing format
•
Clock source—Type of clock source
•
Loopback state—Type of loopback (if enabled) and status: enabled or disabled
•
Last remote loopback request sent—None or deactivate
•
FDL—Status of FDL: standard configured or not configured
•
FDL Transmit Path—Status of path transmission: active or not active
•
FDL Transmit Idle-Signal—Status of idle signal: active or not active
•
FDL Transmit Test-Signal—Status of test signal: active or not active
•
Equipment Identification Code—eic string for FDL
•
Line Identification Code—lic string for FDL
•
Frame Identification Code—fic string for FDL
•
Unit Identification Code—unit string for FDL
•
Facility Identification Code—pfi string for FDL
33 Copyright © 2010, Juniper Networks, Inc.
Chapter 1: Configuring Channelized T3 Interfaces